Job Vacancy

This page is intended for job vacancies. Although we are not a manpower agency, we will post every job opening that our contacts will give us and you must apply personally to the contact number or email given herein. If you have any job vacancy, you are free to post that job opening in this page.

HEATS SCHOOL OF WELDING TECHNOLOGY, INC. VACANCY

  1. Sales Engineer / Marketing Engineer

 Requirements:

  • Preferably Licensed Mechanical or Civil Engineer
  • With five (5) years experience as Sales Engineer in Mechanical Construction
  • With knowledge in Welding Technology (training in Welding, Inspection & NDT is an added advantage)

 Interested candidates should send their CVs with Employment Certificates, Training Certificates, Diploma and PRC License at pwtc_luzon@yahoo.com indicating their Current Salary, Asking Salary and Availability. Only shorlisted candidates shall be notified.

 

  1. Sr. Welding Instructor

 Requirements:

  • Preferably Graduate of BS Industrial Education
  • SMAW NC II Certified
  • TM II Certified
  • With five (5) years industry experience
  • GTAW NC II or GMAW NC II or FCAW NC II Certified is an added advantage
  • With knowledge in Welding Technology (training in Welding, Inspection & NDT is an added advantage)

 Interested candidates should send their CVs with Employment Certificates, Training Certificates and Diploma at pwtc_luzon@yahoo.com indicating their Current Salary, Asking Salary and Availability. Only shorlisted candidates shall be notified.

 

 

 

Responses

  1. BRUNEI NEEDS THE FOLLOWING PERSONNEL:

    HSE Officer
    QA/QC supervisor
    Supervisor
    Welding Inspector
    Welders

    Apply personally at enquiry@mesraalam.biz All applications should reach before January 5, 2009

    By: heatsschoolofweldingtechnology on December 26, 2008
    at 7:59 pm

  2. A QS Firm in Brunei needs the following:

    Quantity Surveyors
    Assistant Quantity Surveyors

    Apply personally at aqs_vacancy@yahoo.com Deadline: Jan. 19, 2009

    By: heatsschoolofweldingtechnology on December 26, 2008
    at 8:02 pm

  3. Heats School of Welding Technology, Inc. is offering OJT for Newly Graduates of BSME and BS Industrial Engineering of TSU. OJT is 2-6 months training as Welding Inspector, NDT Engineer, HSE Officer, Welding Engineer and Welding Instructor. Please email us your cv at pwtc_luzon@yahoo.com. Only shortlisted candidates shall be notified.

    By: heatsschoolofweldingtechnology on December 26, 2008
    at 8:30 pm

  4. Good day sir!

    Wow! This site is really, really good for beginners as well as for experienced people. Do you still have vacant for Entry Level Welding Inspector?

    Thank you very much!

    David C. Valencia
    Mechanical – Rotating Department
    Shell – Pearl GTL Project
    Doha, Qatar

    By: David C. Valencia on January 9, 2009
    at 1:39 pm

  5. Hi David,
    Thanks for coming by and thanks for your comment. Yes I am doing my best to post important topics in this site for our students, visitors and other bloggers who may need these technical things in their career.

    The vacancy for Entry Level Welding Inspector has been occupied. I will let you know when we have the vacancy again.

    I suggest that you familiarize yourself in Welding & other Mechanical Construction related stuff while you are in that Qatar Project so that it will be easy for you once you take CSWIP 3.1

    I will be the first to rejoice when you pass your CSWIP 3.1

    Keep in touch and keep visiting our site.

    God Bless You

    By: heatsschoolofweldingtechnology on January 9, 2009
    at 2:23 pm

  6. gusto ko pong makita ng work in your company. garduate lang po ako ng two year coures com. secretary. marame na po akong job experience.

    By: palmes nornalyn on March 31, 2009
    at 10:30 am

  7. hi nornalyn, expert ka ba sa computer? pls send your cv and let see if you can qualify

    By: heatsschoolofweldingtechnology on April 8, 2009
    at 8:56 pm

  8. Good day sir!

    Do you still have any other available job in your project that will fit to my experience? I will be going back to the Philippines this coming May 19. I feel so sorry cause I was not able to finish my contract but I really have to. Thank you and God bless!

    By: David Valencia on May 13, 2009
    at 3:38 am

  9. Good day sir!

    Do you still have any other available job in your project that will fit to my experience? I will be going back to the Philippines this coming May 19.

    Thank you and God bless!

    More power to HEATS!

    By: David Valencia on May 13, 2009
    at 3:39 am

  10. Malayo na talaga ang narating ng HEATS, akalain mong isang Australian diyan pa sa HEATS nagtraining! And then now, a New Zealander is about to come. Hindi malayo na in the future magkaroon ng branch ang HEATS in abroad.

    Once again sir, CONGRATULATIONS!!!

    More power and God bless!

    By: David Valencia on May 16, 2009
    at 4:27 am

  11. Hi Dave, thanks for visiting us again.
    Ya, Heats is doing good and well. Marami na kaming mga trainees from different parts of Philippines as well as overseas. May trainee kami ngayon from Cotabato City, Nueva Ecija, Batangas, Pasig, Manila, Australia as well as Tarlac, and coming soon (if he push through bec. of swine flu) from New Zealand. I hope na magtuloy tuloy ito para marami kaming matulungan pa. By the way, we will be having our next Welding Inspector’s Course on May 25-29, 2009. We are planning to expand in Quezon City, and we are talking with Bruneian to open up in Brunei. We will also expand our courses in the future to Practical Electricity, Instrument Fitter, Pipefitter, Carpentry and Masonry.
    If our expansion plan succeed, then it will be good!

    By: heatsschoolofweldingtechnology on May 16, 2009
    at 7:48 am

  12. Wow ang galing naman talaga! Mabuhay ang HEATS!!!

    By the way sir, our tankage fabrication here in PEARL GTL Project Doha, Qatar is need of 20 welders who can do FCAW, SMAW & GMAW. With knowldge in all welding processes will be an advantage.

    For those who are qualified(HEATS graduates preferred), please send your updated resume (ASAP) on or before May 18-19, 2009. My scheduled flight will be on May 19 in the late afternoon. I will personally your CV’s to our Manager as soon as I receive it.

    NOTE: This is urgent!!! For those who will not pass the trade test here will be send back home or will become a helper, so be sure that the informations in your CV’s are true and correct base in capability and experience.

    Good luck!

    In behalf of Hyundai Heavy Industries Co., Ltd.

    David Valencia
    Mechanical Engineer
    E-mail Add. : d.valencia@chcfgp.com
    dalevalencia@yahoo.com.ph
    dalevalencia@gmail.com
    r.ramirez@chcfgp.com

    By: David Valencia on May 17, 2009
    at 7:34 pm

  13. HYUNDAI HEAVY INDUSTRIES CO., LTD. is in need of Mechanical Engineers (Static & Rotating)

    For those who are qualified and interested, please send your updated resume, scanned employment certificates (previous and present) and diploma to; dalevalencia@yahoo.com.ph, dalevalencia@gmail.com, dalevalencia@chcfgp.com.

    This is urgent!!! Send your CV,s asap.

    Note: Please indicate your current salary, asking salary and availability. Only shorlisted candidates shall be notified.

    By: David Valencia on May 17, 2009
    at 7:48 pm

  14. Hi Dave, thanks for that opportunity. I will send you their CVs tommorow afternoon.

    By: heatsschoolofweldingtechnology on May 17, 2009
    at 8:20 pm

  15. Hi Dave, thanks for giving us your vacancies. We will tell our friends.

    By: heatsschoolofweldingtechnology on May 17, 2009
    at 8:21 pm

  16. maganda ang programa isa po ako sa nakatapos ng trainee at nagbayad po ako nais ko pong maka pag-trabaho sa abroad pls.tulungan nyo po ako natapos ko po ang smaw plat at pipe6g God blees

    By: elmer mangas on May 29, 2009
    at 1:12 pm

  17. maganda ang programa isa po ako sa nakatapos ng trainee at nagbayad po ako nais ko pong maka pag-trabaho sa abroad pls.tulungan nyo po ako natapos ko po ang smaw plate at pipe6g God bless

    By: elmer mangas on May 29, 2009
    at 1:13 pm

  18. Any Coating/Painting inspector jobs available ??

    kindly mail me if you come across any Coating/Painting inspector jobs !!

    thanx
    regards
    Nikhil
    nikhil.lakhiani@gmail.com

    By: nikhil on August 23, 2009
    at 6:55 pm

  19. any piping inspector course will be available soon in your school?

    thanks,

    jhun

    By: jhun on September 15, 2009
    at 7:38 pm

  20. Hi Jhun, ala pa po sa plano namin. thanks

    By: heatsschoolofweldingtechnology on September 15, 2009
    at 9:33 pm

  21. I am a fresh graduate of NC 2. I am now looking for a job where I can improve my skill and knowledge in Metal works. I leave here in caloocan. I am one of our batch who excel in 1G 2G 3G 4G, pipe 1G 2G 5G 6G.Hope you can help me. Please contact me in this no#09206287706

    By: mark anthony on September 17, 2009
    at 7:20 pm

  22. hi mark thanks for coming by. why dont you try to apply in CIWI in caloocan? CIWI is a big fabrication shop. thanks

    By: heatsschoolofweldingtechnology on September 17, 2009
    at 10:16 pm

  23. Dear Sir/Madam, I’m interested in your reputable school in welding inspector course, do you have CSWIP 3:2 seminar if they have, how much that course fee in cswip?

    pls. reply to my email add.. thank you.

    By: VINCENT B. TUBIS on September 21, 2009
    at 4:33 pm

  24. Hi Vincente, if you are thinking of taking CSWIP 3.1 or 3.2, I suggest you take it directly to TWI. Pls check their schedule at http://www.twi.co.uk . We dont offer CSWIP 3.1 or 3.2 as we are only doing the preparatory course. thanks

    By: heatsschoolofweldingtechnology on September 21, 2009
    at 8:15 pm

  25. sir tatanong ko lang kung halimbawang makapagtapos po ako ng course ng welding
    matutulungan nyo po ba ang mga nakapagtapos sa school nyo maka.work abroad?

    halimbawa po sa australia?

    By: rolando arroyo on September 23, 2009
    at 10:13 am

  26. Hi Rolando, we only refer our graduates to potential employers, but the discretion is up to the employers whether they take them or not. thanks

    By: heatsschoolofweldingtechnology on September 23, 2009
    at 8:20 pm

  27. Hi, heats staff I am glad that we have a welding training center this kind in our country we really need a lot of skilled welder specially on specialized skill like TIG. I am instructor of machine shop here in National Institute for Industrial Training (NIIT) Bahrain (niitbah.com), at present Iam teaching welding because there is no other teacher who can teach this course right now, we have SMAW, GTAW,GMAW,and OAW. I setup the welding laboratory with centralized gas and fume extraction system. Iam looking for a qualified instructor with Bachelor degree for welding who can teach all these type of welding.

    By: Alberto Baylon on September 26, 2009
    at 9:49 pm

  28. Hi Alberto, thanks for your comment and job opening. May I know the complete requirements so that we can publish in our bulletin board? thanks

    By: heatsschoolofweldingtechnology on September 28, 2009
    at 8:32 am

  29. pwede po ba mag ojt ang EE undergrad sa heats?

    By: Frustrated_MilitaryMan on March 18, 2010
    at 8:55 am

  30. Hi MilitaryMan, sorry po ala po kaming EE

    By: heatsschoolofweldingtechnology on March 18, 2010
    at 3:39 pm

  31. hello sir…
    i want to ask if i can enroll directly on your GTAW course, even i don’t have any experience and knowledge on welding??

    By: arnel brian on June 19, 2010
    at 2:05 am

  32. kung wala po kayong experience at wala ring welding knowledge, kailangan po ninyong magsimula sa SMAW NCI, then SMAW NCII then GTAW NCII. Pre-requisite po kasi mga yun.

    By: heatsschoolofweldingtechnology on June 19, 2010
    at 8:01 pm

  33. isa po akong 1st year level ng civil engineering pede po kaya ako mg-take ng training ng ultrasonic testing???? kahit 1st year lang natapos ko???? plz reply po asap??? at kelan po ang nxt na training nyo po sa mga applicant nyo sa ut training????

    By: Ricky on June 22, 2010
    at 4:15 pm

  34. qualified ka po to take UT Course.

    By: heatsschoolofweldingtechnology on June 22, 2010
    at 9:57 pm

  35. i am interested wih this job…
    and i have already requirments
    i graduate in welder At TESDA…
    SMAW NC2…CErtified…

    By: Quintin c neri on June 24, 2010
    at 10:59 am

  36. Hi Quintin, pls email your CV to us for review. Thanks

    By: heatsschoolofweldingtechnology on June 24, 2010
    at 7:15 pm

  37. JOB VACANCY IN UPLINES – PLS APPLY DIRECTLY TO THE ADDRESS BELOW

    From: Jose Consunji
    To: heatsschool@yahoo.com
    Cc: jlquizon@sourceasia.biz; hresources
    Sent: Mon, July 19, 2010 12:13:12 PM
    Subject: Job Openings

    Good day Mr. Jose Jr.

    My name is Jose G. Consunji, General Manager of United Philippine Lines, Inc.
    We are a sea-based manning agency in Manila and we have openings for Machinists for passenger ships, tankers, and bulk carriers. I came across your website and I was hoping to tap into your alumni and provide jobs to your graduates. Please see below qualifications:

    Machinist

    – high school graduate/ diploma/ vocational
    – 22 – 47 years of age
    – basic English
    – 1 to 2 years work experience in same field
    – skills required: basic welding (NC2)
    all types of welding
    operate all types of workshop eqpt
    handle power tools
    can assist in engine overhauls

    For inquiries, please contact the following:

    Ms. Joy Quizon – HR Manager
    Mr. Jeremy Grana – HR Asst.
    Tel No. 527-7491 loc. 234/ direct line: 525-1491
    Email: hresources@uplines.net

    By: heatsschoolofweldingtechnology on July 22, 2010
    at 1:42 pm

  38. sir smaw trainee poh ako pero d p poh ako nkakuha ng nc ll pwd poh b ako mg ojt para makapaghanda s gtaw training 2matanggapm poh b kau ng ojt

    By: toni reyes on August 5, 2010
    at 12:41 pm

  39. smaw nc1 po me, pwede po ba me mag ojt sa heats?or maging scholar para makapag nc2 ako..thanks..

    By: alvin lee on August 5, 2010
    at 10:22 pm

  40. hi alvin, kung gusto mong maging scholar, check our scholarship program, kung na meet mo lahat ng requirements, pls email us your documents for review. thanks

    By: heatsschoolofweldingtechnology on August 6, 2010
    at 8:30 am

  41. gud day sir wala meron poh b kaung ojt kung mkagraduate s inyo

    By: toni reyes on August 16, 2010
    at 4:04 pm

  42. nag re-refer po kami sa mga companies pero depende sa availability nila, kung na-tyempuhan na wala silang available slot after your training, wala po. Previously, mga trainees namin ay nag OJT sa BF Metal sa Rizal. Regards

    By: heatsschoolofweldingtechnology on August 16, 2010
    at 4:14 pm

  43. Hi! sir

    meron po ba sa school nyong pipe or mig gusto ko po kcng mag aral ulit tapos na po aq sa SMAW last week lang po! my NC1 na din po aq!

    By: Kelvin villegas on September 30, 2010
    at 6:19 pm

  44. May SMAW PIPE po kami at GTAW PIPE, pero wala po kaming MIG so far

    By: heatsschoolofweldingtechnology on October 1, 2010
    at 6:26 pm

  45. sir meron b kayo welding inspector training this coming january 2011..and magkano po? ty

    By: rene on December 10, 2010
    at 10:56 pm

  46. Meron po. Our schedule for Welding Inspector (local) in 2011 will be on Jan. 3-7, 2011, June 2011 (exact date to be advised) and December 2011 (exact date to be advise)

    Thanks

    By: heatsschoolofweldingtechnology on December 11, 2010
    at 9:57 am

  47. Hello po,

    College grad. po ako at nagwowork po me s shipbuilding company this time as a pipefitter/welder, tanong ko lng po sna kung pwede po me kumuha ng course n welding inspector…

    Thanks…

    George

    By: George on February 14, 2011
    at 9:22 pm

  48. Sir good day,

    Tanong ko lang po kung po kung pwede ba akong makakuha ng short term sa (pipe welding smaw)? NCII holder po ako ng tesda dito sa cdo.. After ng course ano bang certificate ang makuha ko? Tanong ko rin po, kung sa P9k na tuition kasama na ba ang mga materials like pipes and rods? Interested po ako to take this course……

    Thnx…………

    Mike

    By: Ed Michael on April 6, 2011
    at 2:38 am

  49. Hi Mike,
    Yes pwede kang kumuha ng SHORT COURSE na PIPE WELDING COURSE. Yun pong tuition inclusive na po ang materials. regards

    By: heatsschoolofweldingtechnology on April 6, 2011
    at 7:32 pm

  50. Mabibigyan po kayo ng WPQT after passing the end of course assessment

    By: heatsschoolofweldingtechnology on April 6, 2011
    at 7:34 pm

  51. good day po;

    ask ko lang po kung may available training na po sa painting and blasting at kailan ung sched at ung fee? tnx po

    regards,

    By: marjor ebarle on April 7, 2011
    at 10:24 pm

  52. […] Job Vacancy « Heats School of Welding Technology Inc. (TESDA … If you have any job vacancy, you are free to post that job opening in this page. … We are a TESDA Accredited Welding School managed by a Certified Senior Welding Inspector … […]

    By: Welding Inspector Job Vacancy • Jobs-Careers-Vacancies™ on April 8, 2011
    at 2:24 pm

  53. di pa po available

    By: heatsschoolofweldingtechnology on April 8, 2011
    at 8:50 pm

  54. […] Job Vacancy « Heats School of Welding Technology Inc. (TESDA … If you have any job vacancy, you are free to post that job opening in this page … > Painting Inspector’s Course > Practical Electricity. CHEAP TUITION FEE AND FREE BOARDING HOUSE […]

    By: Painting Inspector Vacancy • Jobs-Careers-Vacancies™ on April 9, 2011
    at 5:16 pm

  55. hi! i was a welding trainor in TESDA Marinduque for 7 years and is currently teaching here in Bahrain as welding trainor for three years now. i have plans of settling down in the Philippines. Could you please help me…

    thank you very much and more power!

    By: hector reyes on May 4, 2011
    at 7:37 pm

  56. email your cv at heatsschool@yahoo.com

    By: heatsschoolofweldingtechnology on May 5, 2011
    at 8:21 am

  57. hi Madam,
    ask ko lng po …for boys only po ba itong smaw..etc for welding…? thanks alot.
    if ever po ba me girls din po ba na naghire workabroad for welding? daghan ty po.

    By: girl31mother on May 12, 2011
    at 3:03 pm

  58. hello po, pwede po sa babae ang welding. kaya lang sa abroad medyo hirap mo, kasi mas priority nila lalaki. Ang mga bansang tumatanggap po ng welder na babae ay Japan, Australia, Canada at America

    By: heatsschoolofweldingtechnology on May 12, 2011
    at 3:14 pm

  59. gud day sir, ask k po sna kung pwede rin maging welding inspector ang ce,ano po ung mga requirements?kc work po ako d2 s korea,hyundai hysco pipe manufacturing,bali ongoing po ako ngaun ngaaral ng TIG welding.taga carangian tarlac din po ako at balak k ituloy welding course k dyan paguwi k.tnx

    By: jeric on June 2, 2011
    at 10:01 pm

  60. pwede po. just visit us sa carangian po. thanks

    By: heatsschoolofweldingtechnology on June 5, 2011
    at 11:04 am

  61. gud day po. sir, ask ko lng po kung my hiring po kyo na machinist. or kht wiper po sa barko?

    By: cris fuentes on August 11, 2011
    at 2:36 pm

  62. gud am, im a semi retired auto mechanic, 45 years old, if i take welding courses, what chances do i have in landing a welding job here in the phils? most companies kasi are hiring people who are less than 45 years old. thanks…

    By: eric tibi on September 3, 2011
    at 8:17 am

  63. hello po, with the knowledge we are sure we can give you, but landing a job at your age we don’t know po. It will depend on the age requirement of the employer. thanks

    By: heatsschoolofweldingtechnology on September 3, 2011
    at 9:00 am

  64. sir/mam,
    pwede po ba mag training sainyo ng welding course like smaw nc1/nc2 and gtaw nc2 kahit di tapos ng elem / high school? di po ako nakatapos kahit elementary eh..pero 20 yrs na po ako working in abroad from 1991 to present,sa mga heavy process industry like cement plant,aluminum plant,petrochemical,gypsum plant as field operator, dream ko po na magkaroon talaga ng skill specially welding..may chance po ba ako in this field kahit di po ako nakapag aral? salamat po..god bless u po..

    By: regg on September 10, 2011
    at 5:29 pm

  65. yes we can give you chance. enroll ka lang sa amin tatanggapin ka namin. thanks

    By: heatsschoolofweldingtechnology on September 11, 2011
    at 10:02 am

  66. Sir heatsschoolofweldingtechnology,
    Medyo marunong po ako sa web design actually marunong po akong gumawa ng website kaso hindi ako gaanong ka-professional..meron po bang course sa inyo about this? and mag kano? o kaya sana may mag scholar sa akin…marunong din po akong mag welding kaso gusto kong maging bihasa..please kindly reply including the requierments and how much…sir sana may discount ako..and may branch ba kayo near in Binangonan,Rizal?

    By: Elias Pinaglabanan on September 20, 2011
    at 12:20 am

  67. wala po kaming web design course. puro po kami welding. regards

    By: heatsschoolofweldingtechnology on September 20, 2011
    at 8:55 am

  68. Dear Sir/Madam,

    My name Ronald and now looking new job for QA/QC Coordinator-Welding Inspector-CSWIP 3.1,if any jobs information,please contact me,to this email :rosi_qc@hotmail.com,thanks.

    Best Regards,

    Ronald,S,ST
    Mobile Phone :+62-81210043441 (Jakarta-Indonesia)

    By: Ronald on November 11, 2011
    at 1:07 am

  69. hi sir dto po ako ngayoon sa saudi mag 4 years na po ako dto, kaso na pa kasama ng na pasuan ka.. pwd po pa nyo ako e hanap ng company, skilled po ako as welder, date po ako sa hanjin ship building, sa zambalez ngayon naman po d2 sa saudi isa po akong erector welder… i know FCAW, SMAW 4G FOR SMAW,TPOS 3G NAMAN PO FOR FCAW…date po akong ship fitter sa hanjin for 3 years… hoping po na matutulungan nyo ako,….. pls email nalang po sa akin thanks and more power

    By: roy estrella on December 19, 2011
    at 5:06 pm

  70. sir,
    good day sir gusto ko lang po e inquire tungkol sa Welding Inspector Coures nyo, nandito po ako ngayon sa West Africa nagtatrabaho bilang task supervisor ng piping, sir gus to sna mag shift nag welding inspector sir kaso lan under graduate po ako ng BS ECE..

    thank you sir..

    regards

    marciano

    By: Marciano L. Berongoy on January 26, 2012
    at 2:24 am

  71. ualified po kayo to take welding inspector course sa amin. regards

    By: heatsschoolofweldingtechnology on January 26, 2012
    at 8:36 am

  72. Sir,
    im presently employed in a welding environment comp.my position here is Quality Controller. Gusto ko lang inquire kong alin bang mgandang training sa akin para mkapagwork abroad?
    im also Engineering Grad.

    By: abraham t rovillos on February 12, 2012
    at 3:39 pm

  73. Welding Inspector and NDT

    By: heatsschoolofweldingtechnology on February 12, 2012
    at 7:54 pm

  74. gandang araw po!!!im fresh graduate of (SMAW)NC11,nais ko po sana maghanap ng work sa lokal or abroad..may alam po ba kayo sir ?salamat po!!!

    By: charlie c.vejano on February 28, 2012
    at 6:07 pm

  75. Am looking 4 pipeline welding jobs enywhere in the world….

    By: oloso Abd Lateef Opeyemi on July 3, 2012
    at 4:31 am

  76. ano po ba ang scope ng painter inspector,ask lag po

    By: roldan on July 12, 2012
    at 9:31 am

  77. Welders 6G required for saudi arabia visa ready, any suitable candidate please do contact fahdbinhazloul@gmail.com or fahdbinhazloul@yahoo.com

    By: Gideon H on December 8, 2012
    at 4:04 am

  78. Do you still have Internship?

    By: Gaylord Dugang on March 28, 2013
    at 2:30 pm

  79. Wala po

    By: heatsschoolofweldingtechnology on April 20, 2013
    at 1:03 pm

  80. Fresh graduates of heats school in welding and interested to be employed as welder in Singapore pla contact techsteel fabrication Pte ltd. Email to sale@techsteel.com.sg.

    By: Patrick Ng on May 21, 2013
    at 11:12 pm

  81. looking job for welding inspector

    By: chand on May 26, 2013
    at 3:26 pm

  82. hello..gud morning!!!need po ba kyo ng instructor sa G-TAW at SMAW?aaply po sna ako sa inyo,ayaw ko na po ksi sa abroad,,nka 11 years na po ako sa abroad bilang isang tigwelder,at nkapagturo nrin po ng mga welder sa uzbekiztan ngayon lng po month ng feb,2013,like ko nlang po kc mg stay dto sa atin pra mkatulong nrin sa mga gustong matutong mging isang tig arc welding,maraming slamat po,ang god bless you,

    By: noel olpindo on September 25, 2013
    at 7:56 am

  83. send your cv and certificates to heatsschool@yahoo.com

    thanks

    By: heatsschoolofweldingtechnology on October 5, 2013
    at 4:31 pm

  84. Dear Sir

    Here with attached my updated resume with more than 3 years exp in power plant & oil and gas , Refinery projects and
    with also AWS- CWI, ISO LEAD AUDITOR 9001-2008,and ASNT Level-2

    Kindly check my resume same as above

    Please inform any vacancy

    Regards

    GONNA. SANTHOSH KUMAR

    B.Tech(Mechanical )

    ph no: +91-9912021298

    By: santhosh kumar gonna on January 20, 2014
    at 5:02 pm

  85. Dear Sir

    i am having with more than 3 years exp in power plant & oil and gas , Refinery projects and also
    with AWS- CWI (Certified welding inspector), ISO LEAD AUDITOR 9001-2008,and ASNT Level-2 certifications
    if there is any vacancy in welding inspectors

    Please inform to me or send the details to may mail id

    Regards

    GONNA. SANTHOSH KUMAR

    B.Tech(Mechanical )

    ph no: +91-9912021298

    mail id: santy.gonna@gmail.com

    By: santhosh kumar gonna on January 20, 2014
    at 5:05 pm

  86. i need a job, my positions welder 4G…i live in batam,indonesia, this my number 082174342885

    By: nandus on March 15, 2014
    at 1:20 am

  87. hi heats school am glad to see your page here…by the way 4 years na ako nagwork as pipe fitter KSA and recently onboard ako sa barko working as fitter for 3 years,now i want to work on Australia as fabricator welder at gusto ko sa inyo mag training para kayo na din bahala mgpa deploy kong sakali man.

    By: Gregorio Silagan on March 15, 2014
    at 10:57 pm

  88. do i have a future in welding if only one of my eye have a good sight cause i have an accident when i was a child that left my one eye blurred and cannot be corrected by glasses.

    By: Rheims on April 12, 2014
    at 3:29 am

  89. Is it necessary for a welding inspector trainee to be an engineering graduate?

    By: Glenda on June 17, 2014
    at 10:36 pm

  90. As much as possible yes. However High School graduates are accepted as long as they have 2 years welding related work experience.

    By: heatsschoolofweldingtechnology on June 18, 2014
    at 7:44 am

  91. Hi.. im a graduate of welding and fabrication technology. Can i ask where could i apply around tarlac? Thanks for your asap response.

    By: clarisse anne montaos on June 27, 2014
    at 6:14 pm

  92. God’s afternoon.. im a graduate of welding and fabrication and i want to look for a job here in tarlac or abroad.. i hope that you could help me.. thanks and GodBless!

    By: clarisse anne montaos on June 28, 2014
    at 10:52 am

  93. try Hanjin po sa Subic

    By: heatsschoolofweldingtechnology on June 28, 2014
    at 11:14 am

  94. i like ur web

    By: brhanu hagos on October 7, 2014
    at 3:56 pm

  95. i like ur web n i will never give up to b ur memebee

    By: brhanu hagos on October 7, 2014
    at 3:58 pm

  96. Good eve sir/maam ask ko lang kung mayroon po ba kayong course sa fabrication tnx…

    By: marmacabenta042810 on October 13, 2014
    at 12:20 am

  97. Ask ko lang po para saan po yong training ng fitting up overseas tnx

    By: marmacabenta042810 on October 13, 2014
    at 12:24 am

  98. pipefitter meron po by schedule kung ma meet minimum participants

    By: heatsschoolofweldingtechnology on October 22, 2014
    at 4:45 pm

  99. Job Vacancy – Immediate hiring
    Welding Supervisor
    No need with experience, but a certified welding supervisor certificate is a must.

    Ever Pacific Steel
    Contact Engr. William Ng 09228590555

    TY

    By: William Ng on November 7, 2014
    at 12:54 pm

  100. from sai suraj i completed my tig welding with 2 years exp i have serching job my contact 7204684858

    By: sai suraj on December 7, 2014
    at 8:26 pm

  101. May job p0ba kau n pwd po skn sir or ma’am skild holder po ako welder 6g po ako nc2 testda m0rtorcycle mecanibs electrecian din po 4local lang muna po kc wala p pong pang applay to abroad cp n# ko po 09236444489

    By: Haji tumbaga on March 24, 2015
    at 2:26 pm

  102. Wla poba jobper for local or abrod nc2 holder po aq smaw

    By: Haji tumbaga on March 31, 2015
    at 7:06 pm

  103. Welder

    By: satyaprasad chappidi on September 28, 2015
    at 8:13 am

  104. Certificate welder

    By: satyaprasad chappidi on September 28, 2015
    at 8:19 am

  105. good day po meron po bng pwedeng applyn pg graduate ng welding inspector course

    By: Francis Aromin on November 25, 2015
    at 8:38 pm

  106. Magandang araw po, pls. Tulungan po ninyo akong maka hanap ng trabaho, under grad. po ako ng drafting, sana po matulungan nyo ako.

    By: joseph peras on January 16, 2016
    at 12:19 pm

  107. My arc weldar 5 years experience current job Vedanta aluminum jharsuguda odisha .india

    By: Mohammad Gulam Gaus on November 6, 2016
    at 7:53 am

  108. Good Afternoon Sir,

    I’m looking for job in welding in SMAW NC I & NC II but i had no welding experience coz Im to young to work in it. I graduated in March 2016 so I become 18 years old in May. I don’ t think that there’s no company can hired me so i’ll hope you can help me.
    Thank you.

    By: Jojith mallari on March 6, 2017
    at 6:06 pm

  109. Good Afternoon Sir,

    I’m looking for job in welding in SMAW NC I & NC II but i had no welding experience coz Im to young to work in it. I graduated in March 2016 so I become 18 years old in May. I do all my best as i can.I don’ t think that there’s no company can hired me so because i search in other companies that they can hired in with a experience in almost 1 year. I’ll hope you can help me.
    Thank you.

    By: Jojith mallari on March 6, 2017
    at 6:09 pm

  110. Good morning Sir,

    Ang graduate po ba ng Civil Eng’g pwede kumuha ng Welding Inspector course kahit wala siya backgroung sa welding?
    Ilang days po ba ang Welding inspector course? Sapat na po ba yan na makapag- abroad?
    Maraming salamat po.

    By: Edmund Tayo on May 6, 2017
    at 3:05 am

  111. pwede po. 5 days po course and exam P11,000 po

    By: heatsschoolofweldingtechnology on July 12, 2017
    at 6:38 pm


Leave a comment