-
- Welder’s Qualification Test (WQT) at 6G Position on a 6 inches Carbon Steel Pipe using GTAW Process
-
- Restricted Welding (5G Position) in a Piperack
-
- Welding a boss using TIG Process
-
- Heats Instructor is teaching the trainees how to fit-up
-
- Practical example of beveling method is shown by Heats Instructor to trainees
-
- Trainees are shown welding in flat (1G) position
-
- A trainee while welding in 6G position using SMAW
-
- Our Australian trainee while welding in 6G position
Advertisements
Very gud site, but detailed of Destructive test , Macros should be added.
Thanks.
By: Yadav Shiva on February 21, 2009
at 4:26 pm
Hi Yadav, thanks for coming by. As you requested, I will include the details for those you requested.
By: heatsschoolofweldingtechnology on February 22, 2009
at 12:30 pm
Hi! gusto ko po sanang mag enroll ng welding course ninyo. paano po ba ako makakapag enroll jan at ano po ba ang mga requirments nyo? after office hours lang po kc ako available. i’ll wait for your responce. thank you and god bless to all.
By: michael A. quintana on April 29, 2009
at 10:53 am
Hi Michael, thanks for coming by. By the way, tagasaan ka ba Michael? pls email us at pwtc_luzon@yahoo.com para makapag usap tayo ng masinsinan.
Ang requirements po ng mga courses namin ay ang mga sumusunod;
REQUIREMENTS OF SMAW NC I
At least 16 years old
Can read and write
Can do basic calculation
Physically and mentally fit
REQUIREMENTS FOR SMAW NC II
With SMAW NC I or with experience in welding
At least 16 years old
Can read and writeCan do basic calculation
Physically and mentally fit
REQUIREMENTS FOR GTAW NC II
With SMAW NC II
At least 16 years old
Can read and write
Can do basic calculation
Physically and mentally fit
To enroll, punta po kayo personally sa campus namin na nasa Romulo Highway, Joanne Subd., Carangian, Tarlac City or call 09054140543 – look for Ms. Grace.
Pls contact us on the above email address fro more info. thanks
By: heatsschoolofweldingtechnology on April 29, 2009
at 11:14 am
I am a fresh graduate of NC 1 and NC 2. I am now looking for a job where I can improve my skill and knowledge in Metal works. I leave here in Rizal, Laguna. I am one of our batch who excel in 1F 2F 3F 4F, 1G 2G 3G 4G, pipe 1G 2G 5G 6G. I submit my project 1-2 weeks before the deadline. Is there a Job Vacancies near in our town? Hope you can help me. Please contact me in this #09216819817.
By: Harry Endozo on May 25, 2009
at 9:36 pm
yes Notify me.
By: Harry Endozo on May 25, 2009
at 9:36 pm
Sir,ask lng poh sana ako kung ano ang requirements for schooling of Welding..1st timer poh ako..ask din poh ako kung ano ang requirements for scholarship..
By: Rogelio Espanol on August 4, 2009
at 10:25 am
Sir,
Good day. Ask lang poh, gusto ko sana mag-aral ng basic welding (Theory & Practical) and NDT and to become welding inspector someday..zero knowledge poh ako sa welding. My friends encourage me to try welding job that’s why i’m looking for the right training school. I’m high school graduate poh. Kailangan ko din po ba maging welder bago maging welding inspector? Ano pa po ang ibang requirements a side po dun sa mga nabanggit na requirements para naman po sa NDT course interesado din po kasi ako? Kayo din po ba ang nagtuturo ng Basic NDT? Plan ko po mag training ng Welding & NDT po sa inyo. Salamat po.
By: Alvin Vasquez on September 16, 2009
at 12:34 pm
Hi Alvin, thanks for coming by. We require min 12 attendees for NDT, if we dont meet that, we dont push through the training. Kung gusto nyo po maging Inspector, we offer Welding Inspector’s Course pero requirements po namin ay at least 3rd year engineering. But if you are willing to take the risk just to attend and learn, that is up to you, but you are most welcome, but the assurance of getting a job as Welding Inspector is very low. Kung gusto nyo pong mag take ng Welding Course, you are welcome din po, please visit us and enroll with us. The best inspector actually are previous welders. regards
By: heatsschoolofweldingtechnology on September 16, 2009
at 1:29 pm
sir,ask kulang kungbakit hanggang sa ngayon ay wala pang maibigay certificate of completion sa akin ang heat school. I am one of gtaw 2nd batch na nagtraining,nakakuha na ako ng gtaw nc 2 from tesda.
By: Ireneo Plamenco on October 17, 2009
at 11:44 am
Hi Ireneo, thanks for coming by. I was told by Grace she needs some requirements from you needed by TESDA so that we can get the SO number. I guess she already talked to you for this matter.
CONGRATULATIONS FOR PASSING THE GTAW NC II ASSESSMENT from TESDA.
By: heatsschoolofweldingtechnology on October 20, 2009
at 11:17 am
Hi. good day. I’m from Legazpi City. I was looking for a tesda accredited school in the phils. that has a TIG welding course and i found your school. I read your rates on your courses and its OK. Do you have a counterpart here?a school?
By: Spencer Timog on February 21, 2010
at 9:28 pm
Hi Spencer, sorry to tell you that we do not have branch in Legazpi city. Most of our Bicolano trainees come over here for the training
By: heatsschoolofweldingtechnology on February 23, 2010
at 7:55 am