Meet the President

The President of Heats School of Welding Technology is Mr. Pedro G. Jose Jr. (see picture below), a native of Kapanikian, LaPaz, Tarlac. He was born in 1973 in the remote barrio of Quirino Isabela. He graduated BSME in 1995 at Tarlac State University. He has been in the field of Welding, QA/QC, Inspection and NDT since 1995 in the Philippines, Kingdom of Saudi Arabia, Qatar, Indonesia and Brunei. He rose from the rank from a Technician up to School President and worked from various Oil and Gas Contractor. He was involved in the Fabrication, Construction and Installation of Power and Generation (Hydro and Thermal), Offshore Structure (96 Feet Diameter X 586 Feet Long Dominion Spar Hull Project). The 6th Spar and Deepest Spar in the World), Offhsore Projects, Oil & Gas (Refinery and Pipeline), Chemical Industry (Tanks and Refinery Piping), Water Distribution Industry (Tanks and Pipeline), and Building Industry (Structural Steel). He was responsible in the preparation of QC Documents such as ITP, Quality Plan and Procedures, Supervision, Witnessing of NDT (UT, MT, PT, Vacuum Box Testing, Hardness Testing, PMI, PWHT), Welding Inspection, Inspection of Piping, Pipeline, Tanks, Structural and Material verification, including Pressure Testing.  He is knowledgeable and conversant in ANSI B31, ASME VIII Div. 1, ASME IX, API 1104, API 650, AISC, AWS D1.1, Aramco Standards, Qatar Petroleum Standards, Brunei Shell Standards, ABS Rules of NDT, and ISO 9001:2000. He already prepared various Welding Procedure Specifications (WPS), Inspection and Test Plans (ITP), QC and Construction Procedures, and Quality Manuals for ISO 9000. He attended various trainings in Welding Inspection, ISO 9000, Safety, and Non Destructive Testing (NDT) in the Philippines, Saudi Arabia, Qatar, Malaysia and Brunei.

As a Sr. Welding Inspector and an Inspector, he already trained and tested thousands of welders in the Philippines and overseas.

jhun-id-pic-copy

Aside from his extensive overseas experience he have the following technical qualifications;

1.) CSWIP 3.2 Senior Welding Inspector (CSWIP- UK)

2.) NACE 1 & 2 Coating Inspector (NACE-US)

3.) Qualified Lead Quality Auditor – Neville Clarke

4.) CSWIP 3.1 Welding Inspector (CSWIP – UK)

5.) Qualified Internal Quality Auditor – Neville Clarke

6.) ASNT level 2 – Magnetic Particle Testing – Setsco Singapore

7.) ASNT Level 2 – Penetrant Testing – Setsco Singapore

8.) Experienced Trainer and Resource Speaker

Certified Sr. Welding Inspector ID (CSWIP 3.2) of Heats President valid until 2013

His Noble Mission for the School is to produce World Class Pinoy Welders, Welding Inspectors & other skilled workers.

Responses

  1. Hi Jhun

    e2 yung link ng ID Layout…

    Juliet

    pls pm me using pinaykeypoint YM kc yun ang laging online. send mo na ASAP yung mga changes or post it in my service page

    By: Juliet on January 16, 2009
    at 6:48 am

  2. thanks juliet. I like the Logo.

    By: heatsschoolofweldingtechnology on January 16, 2009
    at 10:36 am

  3. […] good man behind this project is Engr. Pedro Jose Jr. He is a native of Kapanikian, Lapaz, Tarlac. He has been in the field of Welding, QA/QC and […]

    By: Heats School of Welding Technology « PinayKeyPoint on February 3, 2009
    at 3:35 am

  4. thanks Juliet. Its a nice article

    By: heatsschoolofweldingtechnology on February 3, 2009
    at 12:27 pm

  5. Hi! Sir, Pde po ba kau ma-interview via E-mail lang po.. Para po to sa Project namen sa Social Studies. About sa mga Career.

    By: Nika on December 28, 2009
    at 11:44 pm

  6. Hi Nika, yes you can interview me anytime.

    By: heatsschoolofweldingtechnology on December 29, 2009
    at 9:46 am

  7. Maraming salamat po sir..
    san ko pa lalagay ung mga tanung?

    By: Nika, on December 29, 2009
    at 12:03 pm

  8. pls email me at heatsschool@yahoo.com

    By: heatsschoolofweldingtechnology on December 29, 2009
    at 8:10 pm

  9. alm ko maraming may gustong mag enroll sa inyo! kaya lang malayo kung meron sana sa metro manila mas ok! tnks…

    By: ricky fernandez on February 5, 2010
    at 2:57 pm

  10. Its in our plan to have Manila Branch, still on-going process, but for sure it will not be in 2010, it might be 2011 onwards

    By: heatsschoolofweldingtechnology on February 5, 2010
    at 5:46 pm

  11. Dear Sir,

    Our company analytical & testing technology corp. (ATTC) is involved in distributing NDT products and consumables. If you have any inquiry please feel free to contact us and we are glad to be of service to you.

    Thank you.

    Regards,

    Boying Subida
    02-8019206/02-7288052
    0915-4860597/0932-6744289

    By: rosendo l. subida III on March 15, 2010
    at 11:35 am

  12. Good day!

    Sir, ask lang po ako kung anong advantage ng Welding Inspector Course over Welding Engineer Course? Naguguluhan kasi ako kung ano ang kukunin ko. ECE graduate po ako sir pero employed ako in welding industry.

    By: jad on March 18, 2010
    at 4:47 pm

  13. Ang Welding Engineer walang licensure exam. Ang Welding Inspector may Licensure exam. Kung Certfied Welding Inspector ka, pwede ka ring maging Welding Engineer sa isang kumpnaya. If I were you, WI ang kukunin ko. Pero nasa sayo ang decision.

    By: heatsschoolofweldingtechnology on March 19, 2010
    at 10:54 am

  14. Thank you sir. Saan po ba usually kinaconduct ang licensure exam sa WI sir? Meron po ba sa skul nyo? I’m planning to move to SG by September and look for a job. That’s why I want to upgrade skills to be more equiped and get better chances of landing a good job.

    By: jad on March 19, 2010
    at 2:13 pm

  15. We do training only in preparation for Licensure exam.

    By: heatsschoolofweldingtechnology on March 19, 2010
    at 7:43 pm

  16. hi sir… gusto ko sana mag enroll s inyo.. kaso malayo po ee.. kelan po b kau mag kakaroon ng branch hir in manila…? another question is… tinutulungan nyo rin po ba ung mga graduate ng HEAT na makapag work abroad? thnx sir.. god bless..

    By: michae; on March 23, 2010
    at 9:55 pm

  17. di pa po namin alam kng kelan kami magkakaroon ng Manila branch.

    By: heatsschoolofweldingtechnology on March 24, 2010
    at 6:58 pm

  18. hello mr pedro,sir please have sending my message to you for help to achieve my dream in welding as an orfant.please i fish my tecghnical school for a long time and nobody to help me further more so i decided to lain pipeline welding.so please sir i really want you to use your postision as the president of this company and will God bless you for helping the orfant.sir iwll be graetful if you make my draem come through.THANKS GOD BLESS YOU.

    By: williams ubong on April 25, 2010
    at 12:00 am

  19. Good day!

    Sir, wala bang sked august? Conflict na naman kasi sa sked ko kasi magpunta family ko sa iloilo sept 5-11 so di talaga ako pwede. sigh 🙂

    By: jad on June 30, 2010
    at 8:41 am

  20. AWS-CWI ba Jad? Meron din kami sa December

    By: heatsschoolofweldingtechnology on June 30, 2010
    at 8:04 pm

  21. We are a Manpower agency.

    By: AOG on July 6, 2010
    at 2:32 pm

  22. We are happy to be one of your partner. Email us for further communication. Regards

    By: heatsschoolofweldingtechnology on July 6, 2010
    at 8:13 pm

  23. hello Sir Jun, may i know by now about the total amount may expensed during the whole days of training Sir? tnx.

    By: alan garan on January 2, 2011
    at 6:20 am

  24. anong course po?

    By: heatsschoolofweldingtechnology on January 2, 2011
    at 9:12 am

  25. hi! anong course ang pwedeng kunin if you want to apply as welder dito sa canada and kung wala kang knowledge as welder pero gusto mong mag apply as welder? please give me the quotation of payment at yung schedule for december. big thanks.. cherry

    By: cherry pascual on September 16, 2011
    at 3:52 pm

  26. TIG Welder and in-demand sa Canada. Pero bago ka maging TIG Welder, kailangan mo munang tapusin ang Basic Welding (P6,000 for 6 days) or SMAW NCI (P12,000 for 34 days) then take ka ng GTAW NCII (P34,000 for 34 days). We start the course every monday po so no problem sa schedule.

    By: heatsschoolofweldingtechnology on September 16, 2011
    at 8:22 pm

  27. sir ask ko lang kung pede akong mag enrol ng welder instructor o kung NDT may mga partner ba kayong company na direct na din kaming mag oojt kung sakaling matapos namin ang training? welder po ako sa japan 3 years experience.. sir please responce

    By: rhoi on September 26, 2011
    at 2:11 pm

  28. good morning, po.interesado po ako pumunta sa lugar nyo at makausap kyo ng personal .mrami po akong pwede ma itulong at maipasok s kompanya nyo na mga tao gusto matuto sa welder inspector, painting, at risk basik inspection, electrical level 3. kung merong mga offerd courses sa inyo ayon s mga nbannggit ko.at handa matuto at mgbayad ng ha;laga..please leave ur number….. pra personal nting pag usapan to. thnks

    By: jessica on December 1, 2011
    at 10:37 am

  29. Gud day!ask lng po ako,kung ano po ba mga qualifications pg mg enrol tayo ng welding inspector at painting inspector course sa school nyo?kasi associate lng natapos ko po….coz im her in qatar petrolleum as mechanical technician….i wanted to tke that course..can u plz send me forder information to my email arenillareygil@yahoo.com,thnk you..god bless!

    By: Rey arenilla on July 10, 2012
    at 11:19 pm

  30. You are qualified to join our course in Welding Inspector and Painting Inspector

    By: heatsschoolofweldingtechnology on July 12, 2012
    at 4:39 pm

  31. Sir meron po b kyong ibinibigay na scholarship sa mga taga maynila? ska 30 years old na po ako e. salamat po

    By: rich on August 4, 2012
    at 10:16 am

  32. Good day sir. mig welder po ako d2 sa KSA Riyadh i have NC11 certificate 3G SMAW pero mig welder ako d2 nais kung mag training sa Heatsschoolofweldingtechnology ng tig welding 6g carbonsteel. ask ko lang po ito’y ba ay pwede?

    By: Clemar Baluya on August 16, 2012
    at 4:27 am

  33. may pipe welding na po ba kayo? kung meron na, qualified po kayo sa GTAW NCII, kung wala pa, kuha po kayo ng Pipe welding or SMAW NCII bago GTAW NCII. thanks

    By: heatsschoolofweldingtechnology on August 16, 2012
    at 2:47 pm

  34. Sir, gusto ko po sana mag aral ng welder para ako matutu at masanay at maka pag trabaho ng maayos. Ano po bang klaseng welder na dapat matutunan sa heats school welding technology. Kung sakaling mag enroll ako next month magkanu po ba nag dapat kong bayaran lahat ng gastosin ko para maka pag aral ako sa welder sa heats school welding technology. Sir, sent mo sa email ko lahat ng details para sa mga expenses ko. Thank’s

    By: Ramon on September 22, 2012
    at 5:25 am

  35. for abroad you need the following courses:
    Basic Welding – 6 days – P6,000
    SMAW NCII – 34 days – P21,000
    GTAW NCII – 34 days – P34,000

    Regards

    By: heatsschoolofweldingtechnology on September 24, 2012
    at 10:12 am

  36. Gud pm po sir, gusto ko po sanang i-enroll ang kapatid ko dyan sa HEATS, welder na po sya kaya lang wala syang certification. kailangan pa po ba niyang i-complete ang 268 hours kahit na marunong na syang magwelding?

    By: madel kim on January 17, 2013
    at 3:30 pm

  37. I suggest short courses kng marunong na sya

    By: heatsschoolofweldingtechnology on January 24, 2013
    at 6:57 am

  38. Hi sir, we don’t have any idea how to remove that bec it’s the wordpess set-up. We will try to remove all your comments and see if that will work.

    By: heatsschoolofweldingtechnology on June 18, 2014
    at 9:18 pm

  39. DEAR SIR,
    Panu po kyo makontak tru phone may recomend po sana ako welding instructor…galing narin po siya training center at instructor siya dun.salamat po and GODBLESS

    By: JOSLITO FABIO on August 22, 2014
    at 8:57 am

  40. email us at heatsschool@yahoo.com

    By: heatsschoolofweldingtechnology on September 6, 2014
    at 5:43 pm

  41. Sir magandang umaga po…magkano po sa inyo sng schooling ng TIG welding at ilang buwan po?bale saan po b ang training school sir?sa may cabagan isabela po kc ako nakatira sir..salamat

    By: Jess G. Bulusan on October 7, 2014
    at 12:35 pm

  42. May short course po ba TIG 7 days P19500 may regular course naman na GTAW NC2 34 days P41k

    By: heatsschoolofweldingtechnology on October 7, 2014
    at 4:00 pm

  43. GTAW NC2 – 34 dat P41,000 po

    By: heatsschoolofweldingtechnology on October 22, 2014
    at 4:46 pm

  44. as iam a fresher, I want to be a welding inspector in the future, I have been in the field of NDT for past 1 year, iam forward to complete cswip course

    By: Nishanth on November 10, 2014
    at 6:39 pm

  45. gud am pi dir adk lng po me kng klan oo kau my sked ng exam para sa cwitpos n po me siminar ng cwi sa pws kya lng po d pa me nkakuha ng exam at magkno po ang byad ng exams niyo po? thanks

    By: louie on January 5, 2015
    at 6:55 am

  46. Dear Mr. P. Jose,

    Are you engaged only in Welding? what about other skills like Riggers and scaffolders? I am an HR manager here in one of the largest contractor in Saudi Arabia nowadays. And now, we have been awarded a new 2 bn US$ contract and we need to go to Philippines to recruit between 2000-3000 Filipino workers/staff. Can we talk privately in my email address, jjbisagas@gmail.com

    Thank you

    Juanito

    By: Juanito Jr. Lavares Bisagas/Offshore on March 29, 2015
    at 9:27 pm

  47. Sure sir.
    Email us your LOI

    By: heatsschoolofweldingtechnology on February 15, 2016
    at 2:41 pm


Leave a comment