Posted by: heatsschoolofweldingtechnology | July 21, 2009

Heat Input


Heat Input is very important in Welding Procedure. The recommended Heat Input value by the steel manufacturers should be strictly followed during qaulification of Welding Procedure.

The formula for Heat Input is:

Heat Input (Joules/inch) = (Volts x Amps x 60) / Travel Speed (inch/min)

Advertisements

Responses

  1. […] Heat InputHeat Input is very important in Welding Procedure. The recommended Heat Input value by the steel manufacturers should be strictly followed during qaulification of Welding Procedure. The formula for Heat Input is: … […]

  2. sir ask ko lng kung meron po ku 6gr at magkano po

  3. di po kami nag oofer ng 6GR, mahal po kasi ang pipe para sa 6GR. thnks

  4. magkano poh ang tuition fee and my ojt poh b kau inooffer

  5. how long poh ung training hrs

  6. ang tuition fee po ay ang mga sumusunod:
    SMAW NC I – P12,000
    SMAW NCII – P22,000
    GTAW NCII – P30,000

  7. 268 hours po

  8. sir, gud pm. kng high school graduate lng po pwd po ba mag exam ng cwi/aws?9 years n po akong tig welder, thanks

  9. Yes pwede po. qualified po kayo. enroll now for December schedule. thanks

  10. sir,mam,,,,,tanong k lang po kung anong qualification nyo sa pagkuha sa short course na TIG WELDING CARBON STEEL,,, may alam na rin po ko konti sa basic welding.. thanks…

  11. Ang pre requisite ng TIG short course ay at least smaw pipe welder ka or may SMAW NCII or Pipe Welding Course ka.

  12. I will be in Manilla next week Thursday. Does HSOWT have short courses in
    Tig on carbon steel and stainless steel, and smaw on cs and ss around that time. Are any places avaiable? Does HSOWT do courses in Tig on aluminium?
    thanks

  13. yes we have

  14. we dont have aluminum. thanks

  15. Good day po, ako po si amor gaokan, 45 years na po ako, 1st year college po ako (g.r.c.o. & b.s.m.e.) , 3 years na po akong nag work sa MMG bilang plate welder, nag training din po ako ng tig (cs) sa executive, tanong ko lang po kung pwede ako mag training ng CWI, THANKS PO.

  16. Good day po, ako po si amor gaokan, 45 years, nag training po ako sa t.e.s.d.a. Ng plate welder noong year 2000, at nag training din po ako ng tig (cs) sa executive, 1st year college lang po ako (g.r.c.o. & b.s.m.e.) 3 years na po akong nag work sa mohammad al-mojil group , tanong ko lang po kung qualified po ba ako mag training ng CWI? THANKS PO…

  17. Pwede po

  18. Sir/mam, pagkatapos po ng may 2013 (yan po kc finished contract ko d2 sa k.s.a.) ano pa po ang mga susunod nyong enrolment? At ano po ang mga requirements na dapat kong dalhin kung mag training ako ng CWI? THANKS PO.

  19. Sir/mam magkano po pala ang tuition fee sa training at exam ng CWI? THANKS PO..

  20. ala po kaming CWI this year. pero qualified po kayo to take our Welding Inspector course

  21. sir ung tig na 5 days po ba eh pagkatapos nun may ojt rin?

  22. wala po

  23. helo sir ask lng po ako if meron kayong training schedule sa cagayan de oro.tnx

  24. wala po sir. thanks. tarlac lang po kami so far.

  25. ok.tanong ko lang kung qualified po ba akong mg attend ng training sa welding inspector. graduate po ako sa welding and steel fabrication for 2 years tapos 6G welder(SMAW) din ako dati sa Qatar at may WQT din ako.ma hire kaya ako na hindi nman ako eng’g graduate kahit may cswip ako?tnx and more power!

  26. yes you are qualified.

  27. kasi ng search ako sa mga nag hire na agencies,requirement tlaga nla ang eng’g graduate pag welding inspector..sana matanggap din ako kahit hindi ako eng’g.grad.pro mg enroll pa rin ako sa inyo pgkatapos nang kontrata ko dito sa KSA.tnx Heat School more power sa inyo!

  28. Sir magkano po ang tuition sa TIG with Smaw 6g? need ko po ksi para sa oman at nag bibigay o recomend po ba kau ng students ng pag Ojt na company

  29. SMAW NCII 21,000, GTAW NCII, 34,000

  30. Sir, kailan po ang schedule nyo ng enrollment para s cwi this year? magkano po b ang tuition s cwi training course? thanks po

  31. Wala po kami cwi kc hirap magbuo ng 20 participants. USD2,200 kc fee. Ang meron lmg kmi is local welding inspector offered monthly. Thanks.

  32. We are not in the position to say you are qualified bec we are not aws nor cswip. Pwede ka inquire sa cswip or aws. Pero sa palagay ko personally pwede ka

  33. Mam/Sir, thank you po sa sagot, but can i ask another question, how can u say na sa palagay mu personally i am qualified? saan po kayo nag base mam/sir? Gusto ko lang po sana malaman para my idea lang po ako, i will w8 for ur reply. Thank You and More Power.

  34. Walapo local WI lang

  35. Hi just wondering on pressure tig and stick courses coming up

  36. Our course runs continuosly all year round except sundays and holidays. thanks


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Categories

%d bloggers like this: