Courses Offered

Code Course Description No. Of Hours Fee Course Schedule Enrollment
SMAW NC I Shielded Metal Arc Welding – Plate 268 P12,000.00 Starts every Monday Enrollment daily
SMAW NC II Shielded Metal Arc Welding – Pipe 268 P21,000.00 Starts every Monday Enrollment daily
GTAW NC II Gas Tungsten Arc Welding – Pipe 268 P34,000.00 Starts every Monday Enrollment daily
WI – II Welding Inspector’s Course 40 P10,000.00 Monthly Enrollment on-going
PIC-II Painting Inspector Course 40 P10,000 Monthly Enrollment going-on
SHORT COURSES
CODE COURSE DURATION TIME SCHEDULE FEE
BWC Basic Welding Course 48 Hours 8:00AM to 5:00PM Daily P6,000
PWC Pipe Welding SMAW 48 Hours 8:00AM to 5:00PM Daily P9,000
GTC TIG Welding Carbon Steel 48 Hours 8:00AM to 5:00PM Daily P16,000
GTS TIG Welding Stainless Steel 40 Hours 8:00AM to 5:00PM Daily P21,000
WI Welding Inspector’s Course 40 Hours 8:00AM to 5:00PM Monthly P10,000
PIC Painting Inspector Course 40 Hours/course 8:00AM to 5:00PM Monthly P10,000
ISO ISO 9000 Awareness 4 Hours - Contact us P1,000
IQA Internal Quality Auditing 16 Hours 8:00AM to 5:00PM Contact us P2,000

WE CAN ALSO ARRANGE CSWIP WELDER’S QUALIFICATION (CSWIP-WQT) AT SEPARATE PAYMENT OF P9,500/TEST. WE NEED MINIMUM 20 APPLICANTS. THE TEST WILL  PUSH THROUGH IF APPLICANTS ARE LESS THAN 20 PAX. PLS. CONTACT US FOR TEST SCHEDULING.

WE ARE THE CHEAPEST PRIVATE WELDING TRAINING SCHOOL

IN THE PHILIPPINES

For enrollment, email us at pwtc_luzon@yahoo.com or call/txt us at 09054140543 – look for Grace

Requirements for Enrollment:

For SMAW NC I, NC II & GTAW NC II – Biodata, Barangay Clearance, Medical Certificate and School Credential.

For Welding Inspector’s Course, at least 3rd year engineering. To enroll, visit us personally in our Tarlac Campus and fill-up the registration form including registration fee of P1,000.00 (non-refundable) or email us for booking and we will email you the registration form. You will only be registered upon payment of registration fee. You will not be considered registered until you pay your registration fee. You can send your registration fee to Heats Bank Account. Contact us at 09054140543 for the bank details and registration.

Deadline of ENROLLMENT is 2 weeks before the course date. HSWTI reserves the right to cancel any course schedule when minimum number of enrollees is not met.

Responses

  1. I want to apply fo rth is course ,Gas Tungsten Arc Welding – Pipe. plese let me know the fees in usd dollars.I am writing from Nigeria.
    Thank you.
    williams

    By: williams opara on February 5, 2009
    at 6:19 pm

  2. Hi Williams, thank you for visiting. Our GTAW II is US$550 for 268 hours.

    By: heatsschoolofweldingtechnology on February 6, 2009
    at 9:32 am

  3. Other Companies (Edited) are offering courses mostly same as you are offering, How does your courses differs from them (specifically Welding Inspectors Course and NDT)?

    By: sid millo on March 10, 2009
    at 9:27 am

  4. Hello Mr. Millo, thanks for coming by. I dont know what is our our difference but we want to inform you of the following:
    For our Welding Inspector’s Course
    1.) Our instructor is a Certified Sr. Welding Inspector (CSWIP 3.2 – UK)
    2.) We ensure that our participants are ready once they plan to take the CSWIP 3.1 Training and exam.

    For our NDT
    1.) Our instructor is a Certified ASNT Level III

    By: heatsschoolofweldingtechnology on March 10, 2009
    at 1:43 pm

  5. good day in your good office sir -mam i want to know if itake mpi course level 1 and 2 and after i finshed it could you find a company so i can trained or employed.right now im here in qatar working in oil and gas as welder smaw .thanks for these sites and more power and god bless.

    By: alan cardel on March 22, 2009
    at 3:50 pm

  6. Hi alan, thank you for your interest to our courses. Sorry that we cannot promise you that we can find a company that you can be employed in. but we do referral, but we do not have guarantee even we refer because its the discretion of the companies. thanks.

    By: heatsschoolofweldingtechnology on March 23, 2009
    at 4:13 pm

  7. gud day again and thanks for the answer i changed my mind and i like to continue my line of carrer cause im welder and i have a lot experience in smaw but i want to learn tig welding and if you dont mind sir i like to ask in case i trained in your school and finished can i go to subic port for ojt or employed [thanks and may god bless your site.

    By: alan cardel on March 24, 2009
    at 2:24 am

  8. Yes, there is one employer in Subic who is looking for newly graduate in TIG

    By: heatsschoolofweldingtechnology on March 26, 2009
    at 1:22 pm

  9. Sir,
    Thanks for your reply, Actually im working here in Libya, I coming to Manila this July for my vacation thats why i want to take welding inspector. So how about UT,Mt and PT available by July. .It have certification after trainning ? I hope next year more schedule to come for Welding inspector. It is a good opportunity to all to learn welding as per code and standard.

    Thanks

    By: Joel Dionido on April 14, 2009
    at 11:11 pm

  10. Hi Joel, thanks for coming by. I hope that in future, we can make more schedules for the WI training. Our UT, MT, & PT are done twice a year also same as WI Course, and it will be in May and December as well.
    It is our plan to expand our training schedules so that we can reach on those who really needs to be trained. Thanks

    By: heatsschoolofweldingtechnology on April 15, 2009
    at 10:11 am

  11. sir good day, im looking for tesda accridited course,near in san pablo city,laguna..but i interesting to your course offered..do u have a branches here in laguna…

    By: rico on June 5, 2009
    at 5:19 pm

  12. Hi Rico, thanks for coming by and thanks for your interest to our courses but sorry to tell you that we do not have any other branch. We only have our Tarlac Campus. Thanks

    By: heatsschoolofweldingtechnology on June 5, 2009
    at 5:22 pm

  13. sir sana poh mag karuon kayo ng branch dito sa laguna or batangas…pra kahit papaano uwian kami…thanks sir god bless…

    By: rico on June 5, 2009
    at 5:40 pm

  14. Hi rico, We are hoping na makapag open kami ng Branch sa Quezon City. Laguna Batangas, we do not have plan yet.

    By: heatsschoolofweldingtechnology on June 5, 2009
    at 8:07 pm

  15. Hi Sir,

    Good day , im planning to take a course in welding , do you have a night classes.

    thanks,
    Leo

    By: leo on July 26, 2009
    at 12:14 pm

  16. hi Leo, thanks for coming by. At the moment we do not have evening classes. Are you from Tarlac Leo?

    By: heatsschoolofweldingtechnology on July 26, 2009
    at 2:57 pm

  17. Good day poh!..ask lang poh sana kau if may paaralan din poh bah kayo dito sa davao?

    By: Rogelio Espanol on August 4, 2009
    at 10:37 am

  18. Hello Rogelio, thanks for coming by. Pasensya ka na, wala po kaming Branch jan sa Davao. So Tarlac lang po kami. Thanks po

    By: heatsschoolofweldingtechnology on August 4, 2009
    at 5:39 pm

  19. hi good day sir,tumatanggap po ba kau jan ng pgs schoolarship?

    By: aldrin on August 8, 2009
    at 1:21 pm

  20. gusto ko po sana mgtrain jan ng gmaw and gtaw using pgs schoolarship wala po kc school na kagaya ng mga gamit nyo jan d2 sa pasig city?

    By: aldrin on August 8, 2009
    at 1:24 pm

  21. hi aldrin, tumatanggap po kami ng PGMA Scholar dito pero through TESDA po. so apply po kayo sa TESDA then, tsak kayo punta dito. thanks

    By: heatsschoolofweldingtechnology on August 8, 2009
    at 5:52 pm

  22. good day! have you got GMAW classes with certification as well?
    thanks and more power

    By: etoy on September 3, 2009
    at 1:37 pm

  23. Hi Etoy, sorry to inform you na wala kaming GMAW Course so far. Di kasi masyadonf in-demand yun. thanks

    By: heatsschoolofweldingtechnology on September 3, 2009
    at 4:34 pm

  24. hello just asking im 22 years old..
    how can i take any welding course in ur school?

    my uncle said that i have to learn welding
    so he can help me to get a job
    my uncle is a tig welder in texas.

    i dont have any experience in welding….
    but i want to learn just like my uncle.

    FOR NOW IM LOOKING FOR MY SCHOOL “WELDING TRAINING SCHOOL”

    By: arnie asenita on September 5, 2009
    at 4:25 pm

  25. AY PEDE PLA TAGALOG E!… DI KU NBSA AGAD

    ANU PO BA GAGAWIN KU..
    GSTU KO PO MAG ENROLL SA SCHOOL NYO
    TGA QUEZON CITY PO AKO…

    SA MGA BABAYRAN WALA NMN PO PROBLEMA
    SABI NG MOM HANP DAW ME E
    HEATS PO NHANAP KO E..

    ANU PO GAGWIN KO?

    By: arnie asenita on September 5, 2009
    at 4:28 pm

  26. guys what is the 1st step to be a welder…

    anung course ang una kong kukunin???

    By: arnie asenita on September 5, 2009
    at 5:33 pm

  27. Hi arnie, thanks for coming by. i sent a message to your eamil already. Pls call/txt ust at 09054140543 for enrollment. thanks

    By: heatsschoolofweldingtechnology on September 5, 2009
    at 6:05 pm

  28. Hi arnie, nag email na kmai sayo. thanks

    By: heatsschoolofweldingtechnology on September 5, 2009
    at 6:06 pm

  29. ang first step po ay kumuha kayo ng SMAW NC I (PLATE WELDING)
    second step po ay SMAW NC II (PIPE WELDING)
    third Step po ay GTAW NC II (TIG Welder Pipe)

    For enrollment, pls call/txt us at 09054140543 – look for Grace thanks po

    By: heatsschoolofweldingtechnology on September 5, 2009
    at 6:09 pm

  30. thnx po
    nxt month po ako enroll!!

    By: arnie asenita on September 5, 2009
    at 7:27 pm

  31. you are welcome po.

    By: heatsschoolofweldingtechnology on September 5, 2009
    at 9:31 pm

  32. hi, since GTAW is a combo of SMAW I and II..is it ok to enroll in the GTAW course to start?, by the way i dont have any formal training of any welding course yet, i’m an undergrad of a 4 yr. advertising course, i would like to enroll in your school,..’am interested w/ the GTAW NC course, can you tell me what’s the difference between a GTAW and TIG welding?..thanx, more power and God bless!

    By: deric on September 15, 2009
    at 8:03 pm

  33. Hi Deric, thanks for coming by. GTAW and TIG is just the same. GTAW is an American term which is Gas Tungsten Arc Welding while TIG is British term which is Tungsten Inert Gas, these two are just the same.

    Ang GTAW po ay hindi combo ng SMAW NC I at SMAW NC II. Ibang process po ang SMAW at ibang process naman ang GTAW.

    As a beginner po, you need to start in first step which is taking up the SMAW NC I. After ma take nyo po ang SMAW NC I, pwede nyo ng kunin ang SMAW NC II, pag may SMAW NC II na kayo, pwede na kayong kumuha ng GTAW NC II.

    Ang pre-requisite po kasi ng GTAW NC II ay dapat may training ka as SMAW NC II or may experience ka as Pipe Welder (SMAW).

    Ang pre-requisite naman ng SMAW NC II ay dapat may training ka as SMAW NC I or may experience ka as Plate Welder (SMAW)

    Thanks po

    By: heatsschoolofweldingtechnology on September 15, 2009
    at 9:46 pm

  34. Thanks for that.
    Hopefully nextyear I get to sign up on your class. At sana may branch na rin kayo sa metro manila area next year. More power guys!

    By: etoy on September 16, 2009
    at 2:58 pm

  35. hi etoy, thanks for visiting us. See you soon here in Heats!

    By: heatsschoolofweldingtechnology on September 16, 2009
    at 3:07 pm

  36. hi heats! do you have any training grounds in manila or q.c. area aside in tarlac?, sobrang layo kse, i’m from bulacan btw, also are you affiliated with any other center (edited)..thanks heats for the response in advance. goodluck! Godspeed!

    By: joshua on September 16, 2009
    at 7:53 pm

  37. Hi Joshua, thanks for coming by. Sorry to inform you that we do not have branch in Manila area yet (coming soon). We are not affiliated with any other training center. We are TESDA ACCREDITED welding school. thanks

    By: heatsschoolofweldingtechnology on September 16, 2009
    at 8:37 pm

  38. gud day sir,

    makitanong lang po pwede po ba akong kumuha ng mga ndt courses nyo kahit first year lang po ako sa college ? almost three years na po ang experience ko sa mechanical construction from local project up to here in abroad. nag-aaral po ako ng computer dito sa qatar every friday.

    By: rojan on September 22, 2009
    at 1:23 am

  39. Hi Aldrin, we are not affiliated with them. We have 2 on-call ASNT Level 3 (a Filipino and an Australian) who can conduct the course and certify as well. But we need a minimum 12 trainees before the course push through.

    Thanks.

    By: heatsschoolofweldingtechnology on October 13, 2009
    at 3:06 pm

  40. Hi sir/ma’am,

    Balak ko pong kunin sana yung Welding Inspector course ninyo. Ano po ba’ng mga kailangan kong i-take? Graduate po ako ng BSCE w/o license. At saka nire-refer po ba ninyo ang mga graduates ninyo for companies abroad? Thanks.

    By: Chito on October 19, 2009
    at 5:47 pm

  41. Hi Chito, thanks for coming by. You are qualified to take our Welding Inspector’s Course. We have one on Dec. 7-11, 2009. Enrollment is now going-on.

    We refer to contact companies but still the decision for hiring is up to them.

    Thanks

    By: heatsschoolofweldingtechnology on October 20, 2009
    at 11:19 am

  42. Thanks po sa feedback. Bale kung Welding Inspector po kukunin ko, hindi ko na po kailangan kunin yung SMAW NC I, II, and GTAW II? Included na po ba sila dun sa Welding Inspector course alone? Or do you recommend na kunin ko sila if not included?

    By: Chito on October 20, 2009
    at 11:57 am

  43. Hi Chito, thanks for coming by. Being a Welding Inspector, you don’t need to be a Welder. Your engineering degree is enough for you to qualify to take the Welding Inspector’s Course. However, a lot of good Welding Inspectors are previous welders. I dont recommend for you to take SMAW or GTAW course, but if you have the time and money, it will be a good edge for you! Thanks

    By: heatsschoolofweldingtechnology on October 20, 2009
    at 1:36 pm

  44. Thank you po ulit. Pag-iisipan ko po. Mas maganda kase pag me alam ka rin sa actual welding mismo.

    By: Chito on October 20, 2009
    at 5:44 pm

  45. Madam!
    good day!

    i am related to a sub-contracting firm here pacita.
    were looking forward for your help to pls. give us some graduate who are still available for work. because we have urgent hiring of Automotive grads. (welding Fabrication, Tig welder/ mig we4lder)
    just send it to the email that i gave.

    thanks!
    Godbless!

    By: Ms.cheliy on November 5, 2009
    at 1:01 pm

  46. Hi Ms Cheily, thanks for coming by, we already sent CV of some of our graduates, we will send you more this week. Thank you very much for your support to us!
    Contact us at 09054140543 – look for Grace everytime you need welders.

    Thanks

    By: heatsschoolofweldingtechnology on November 5, 2009
    at 1:19 pm

  47. Hi. I’m interested to enroll in your Inspector’s Course Program, by the way I’m a Civil Engr. But I have a problem with the limited schedule you have. Is there a possibility that you could offer an early next year schedule (first quarter of the year) for this program aside from June? so that I could plan ahead my vacation leave for the first quarter of this coming year. Thank you in advance and more power.

    By: leo on November 10, 2009
    at 3:15 pm

  48. Hi Leo, thanks for coming by. Those are the only schedule we have but keep visiting our website because we sometimes offer ad hoc seminar in between those schedules. Thanks

    By: heatsschoolofweldingtechnology on November 10, 2009
    at 4:06 pm

  49. Magandang araw po ulit. Tanong ko lang po tungkol sa requirements ng SMAW at GTAW. Ano po ba ang kailangan under sa School Credentials?

    By: Chito on November 11, 2009
    at 9:45 pm

  50. Hi Chito, thanks for coming by.

    Ang requirements po ng SMAW at GTAW ay ang mga sumusunod:
    1.) Biodata
    2.) ID Picture
    3.) School card (elementary or high school or college)
    4.) Barangay Clearance
    5.) Medical Certificate

    PRE-REQUISITES:
    SMAW NC I – none
    SMAW NC II – must be an experienced plate welder or with SMAW NC I Training or license
    GTAW NC II – must be experienced pipe welder or with SMAW NC II Training or license

    Thanks

    By: heatsschoolofweldingtechnology on November 12, 2009
    at 7:57 am

  51. Good day!
    Im Computer Engineer Graduate in 2000 and i work in Japan in a Sheet Metal company from 2004 to Sept. of 2009, i work there as a welder
    but yung work ko is puro spot lang both in welding and argon.
    since yung knowledge ko purely experience lang dun ko lang natutunan hndi ko alam yung mga correct term sa welding and yung name in japanese is different thats why.
    I just want to inquire about “Welding Inspector” course if pwede ko kumuha ng course na to?
    If I want to enroll in SMAW NC II ok lang b kung d n ko mag SMAW NC I since may experience n ko s welding and argon? after SMAW NC II ill take GTAW NC II?

    When is the available sched of courses? meron b available boarding house jan malayo ksi dto s place ko? THANKS……..

    By: Edison on November 12, 2009
    at 6:41 pm

  52. hello sir,
    graduate po ako ng metallurgical engineering, and balak ko sana kumuha ng welding inspector course. kelan po ang ang sched nyo para sa WI course?
    if i have the time and money, may irecommend po ba kayo na course na kunin ko muna before or after ako mag welding inspector course?
    thanks in advance.
    God bless

    By: TJ Torrano on November 12, 2009
    at 7:01 pm

  53. Hi Edison, thanks for coming by. I already sent the reply of your query to your email. thanks

    By: heatsschoolofweldingtechnology on November 13, 2009
    at 8:26 am

  54. Hi TJ, thanks for coming by. Our WI course will be on Dec 7-11, 2009.

    By: heatsschoolofweldingtechnology on November 13, 2009
    at 8:37 am

  55. Hi po ulit. When you say school card po (under requirements ng SMAW at GTAW), yun po ba yung Transcript of Records? Grades po kumbaga?

    By: Chito on November 14, 2009
    at 10:18 pm

  56. I would to apply in your company as a smaw welder. I graduated this year where I got a highest grade in our class which I know that I can compete among the rest of the applicant. My knowledge and in skill in metal work is a great challenge for me that’s why I want to pursue this career. I don’t have a lot of experiences but I am easy to learn and willing to devote a lot of time the expertise this field. Hope that you consider my application.

    By: Harrizon on November 15, 2009
    at 5:12 pm

  57. Pwede rin po yung transcript of record kung meron po kayo. kung wala naman, kahit class cards lang. thanks

    By: heatsschoolofweldingtechnology on November 16, 2009
    at 9:39 am

  58. gud day mam , i would like to inquire if there is a schedule for welding inspectors course level 1 . in december 2009 , what are the qualifications and pre requisites for these training … tnx

    By: eric on November 18, 2009
    at 3:03 pm

  59. Hi Eric, thanks for coming by. We have welding inspector’s course on Dec 7-11, 2009. End of enrollment will be on Nov. 30, 2009. Thanks

    By: heatsschoolofweldingtechnology on November 18, 2009
    at 4:08 pm

  60. hi guys, i jst wnt to give some tips and advice to our kaba2yan about sa ndt and inspection jobs, at sagutin na rin tanong ni rojan, well u dnt have 2 be a college grad. to be an inspector marami mga training schools, tips ko lang na mag-start kayo sa ndt, and try to have at least 3-6 mos. ojt,sigurado mkakapag-abroad kau, and then try to upgrade like the welding inspector courses, or kung maswertehan nyo kuha kayo rope access, mas mganda sa offshore yan, ngumpisa din ako sa wala,tambay,sa ngayon may rope access ako at multi ndt abroad,so tyaga lang at kalangan talaga maginvest sa mga training, ask ko na rin po kung ano sched ng welding inspectors seminar at magkano,,,txn..morepower HEATS..sana may forum para marami makaalam

    By: dan on November 25, 2009
    at 12:02 am

  61. HI Dan, thanks for that practical advice. We have Welding Inspector’s Course on Dec 7-11, 2009 and the course fee is P10,000. inclusive of lunch, certificate, module and snacks. thanks

    By: heatsschoolofweldingtechnology on November 25, 2009
    at 6:12 am

  62. hi…we are really interested to enroll for you non destructive training but we had a hard time searching for schools that are accredited by tesda..kindly send as all the information and contacts no that we needed so that we can enroll ASAP..thankx

    By: carmi barboza on December 6, 2009
    at 4:00 pm

  63. Good day!
    Sir/Mam, i just like to ask if you have training schedule for W.I.this coming 2010?I am an ECE grad but i have a small knowledge in welding..I am interested in your W.I. course.And can you send me your course outline for WI thru my email.
    Thank you and more power!!

    By: arman on December 7, 2009
    at 9:23 am

  64. Good Day;
    This forum really helps a lot.
    I am currently employed as an area manager for NDT Company here in KSA. I have ideas on NDT methods but not hands on. I am Registered Mechanical Engineer

    I would like to know if you are offering courses on between march or april next year during my vacation

    1. Basic Welding
    2. Welding Inspection (Is this covers CSWIP review)
    3. Radiographic Test and Film Interpretation

    Reading the lines it was mentioned that there is no pre requisites required for welding inspection.

    Thanks
    Arthur David

    By: Arthur V. David on December 9, 2009
    at 4:00 pm

  65. hello! my brother wants to enroll..what are your requirements? Because,unfortunately he is high school undergraduate..If he can possible enroll, what should be his course as a starter? and for the payment,do you have installment plan for each courses? thank you and i hope to get a response soon.

    good day!

    Lorna

    By: lorna idusora on December 19, 2009
    at 3:53 am

  66. Hi Lorna, your brother is highly qualified to join us. We exist for this purpose. We want to give a chance to allOut of school youth. Rgrds

    By: heatsschoolofweldingtechnology on December 19, 2009
    at 5:23 pm

  67. thank you so much.. wanna know what should be the course as a STARTER? and how about the payment? do you have installment basis,say for each course?

    need a response as soon as you may..please..
    thanks again!

    LORNA

    By: lorna idusora on December 22, 2009
    at 2:50 am

  68. Hi Lorna, as a start, he needs to take SMAW NC I, then SMAW NC II and if he intends to go for advance course, he can take GTAW NC II.

    The fee are as follows;
    SMAW NC I – P12,000
    SMAW NC II – P22,000
    GTAW NC II – P30,000

    We have installment basis. You can contact us at 09054140543 – look for grace for the installment scheme. thanks

    By: heatsschoolofweldingtechnology on December 22, 2009
    at 5:57 pm

  69. thanks so much for the quick reply..

    good day!

    LORNA

    By: lorna idusora on December 23, 2009
    at 2:58 am

  70. you are welcome po, see you in Heats.

    By: heatsschoolofweldingtechnology on December 23, 2009
    at 8:22 pm

  71. d2 po ako sa saudi,pwede rin po bang mag traine ako ng welding inspector? at sa anung level po ba ako pu pwede.

    By: ramil on January 21, 2010
    at 12:03 am

  72. Hello Ramil, opo, pwede po kayong mag training ng Welding inspector’s Course basta meron kayo ng mga sumusunod:

    Ikaw ay 3rd year engineering, o kung hindi naman nakaabot ng 3rd year engineering, ikaw ay may isang (1) taong experience bilang welder, o welding foreman o supervisor o inspector.

    By: heatsschoolofweldingtechnology on January 21, 2010
    at 8:07 am

  73. Hi, gusto ko po sana mag-enroll ng NDT course, anu po ba requirements ninyo at fee.?

    Thanks;

    JIM

    By: Jimmie ray on January 25, 2010
    at 7:06 pm

  74. sana magkaraoon pa akayo ng branch sa metro manila. tnks

    By: ricky fernandez on February 5, 2010
    at 2:55 pm

  75. Dear sir,

    I have a keen interest in technology and innovation but I am not an engineer or a technical expert. My real job is completely different since I am a GP doctor. But this interest has brought me to visit your website time and time again. So I finally plan enroll in your school to take up welding in ARC, TIG/MIG. My objective is to learn this craft more as a hobby and as a side business in metal fabrication. I have noticed that the fee for the short course from the full course is not that big for me so I am opting for the full course. My question is : If I take the full course package in SMAW1/SMAW2/GTAW, would it be more advantageous in terms of skill and know how if compared to the short course? Or would the difference be only in the course certification and the skills outcome the same?

    Thank you sir.

    -aruni.

    P.S.
    I am also postponing my procurement of welding machines until I have taken this course since I have no background in the work shop business what so ever.

    By: aruni ochoa on February 13, 2010
    at 7:36 pm

  76. Hi Aruni, we already emailed you our response. thanks

    By: heatsschoolofweldingtechnology on February 14, 2010
    at 8:03 am

  77. hi sir@ maam!frst i just want to say belated happy valin.day.,BTW; b4 i dicide to post here a messages im almost done reading a all comments and im interested to enroll in your school.im from japan wrking as a welder in suzuki motors comnpy.base in my expercience in 2yrs welder cn i take GTAW NC 11?
    japan now experienced a low economy manny people don;t hv work tahts why im searching a new job and my plan is going back to phills. and enrol in tesda accredated branch.wht’ are the requirments in GTAW NC 11.i am qualified?thnaks a lots @ god bless us.

    By: lets on February 16, 2010
    at 12:38 am

  78. Hi Let, thanks for coming by. Our GTAW NC II requirements are as follows:
    1.) SMAW NC II Certificate or SMAW NC II Training or Experienced SMAW Pipe Welder.

    If you have the above qualification, then you can enroll directly to our GTAW NC II. If you don’t have yet, then you need to start in SMAW Course either SMAW NCI or NC II depending on your experience. What is your experience anyway? thanks

    By: heatsschoolofweldingtechnology on February 16, 2010
    at 7:07 pm

  79. even if i hv a cert.from japan? bfore in phils.i was also a welder in japanes compny from cavite,mig welder.and now im also a mig welder here in japan.THNKS FOR the INFO.

    By: lets on February 17, 2010
    at 3:37 pm

  80. Hi Lets, that is our pre-requisite. But since you are a GMAW Welder, you don’t need to take SMAW NC I. You can enroll SMAW NC II directly or a SMAW Pipe (practical) refresher course. Once you finished any of that two courses (SMAW NC II or SMAW PIPE Refresher course), you are qualified to take GTAW NC II. Thanks

    By: heatsschoolofweldingtechnology on February 17, 2010
    at 3:50 pm

  81. ok,thanks again for the info.so,i ned to enrol two courses at same tym.smaw pipe and gtaw nc pipe. Q:i will recieve my cert.after i finish the # of hrs in this two courses right? bcos of two courses 268hrs for smaw pipe and 268hrs for the GMAW pipe total off 536 hrs.if the class is 8hrs evry day from monday to friday this almost 4 months.. Q:when will class the start? 2)how manny hrs.evry day or how manny days in one wek? 3)enrollment end?DOUMO ARIGATOU GUZAIMASU :)

    By: lets on February 17, 2010
    at 11:03 pm

  82. Hi Lets. Yes, you need to enroll two courses whcih is SMAW NC II and GTAW NC II. Each course is 268 hrs or 34 days with a total of 68 training days. If you enroll now, you can start on monday. We always start a new schedule every monday. You will finish the two courses after 68 days. thanks

    By: heatsschoolofweldingtechnology on February 18, 2010
    at 7:56 am

  83. ok, thanks you sIR!

    By: lets on February 19, 2010
    at 9:26 am

  84. You are welcome Lets and see you in Heats

    By: heatsschoolofweldingtechnology on February 19, 2010
    at 10:31 am

  85. maybe by may or june im going back to phils.after i finish my contrct here in japan.BTW sir, i want know about the rules in apartment that’s bed spacer? how manny in one room?wht did u mean by free apartment,its include water and lights or only room? about the days of class sir its better if we hv a day for rest even if only one day thats enough.thnks…..:)

    By: lets on February 20, 2010
    at 5:01 pm

  86. how manny hrs. the practical welding and discussion per day?i mean # of hrs. in discussion and actual welding?so that ,in that way we can calculate if thats enough to learn evry level.how about the clothes for welding,gloves,face mask i(nclude respirator),safety shoes.foot cover are also free or not?im so sooryy sir if i have a lots of question..:))

    lets imrove our knowledge about welding…

    very truly yours:
    lets

    By: lets on February 20, 2010
    at 5:34 pm

  87. how can i have the application form from your institute?

    By: MICHAEL JOHN on March 13, 2010
    at 10:03 pm

  88. We don’t have online application but you can contact us at 09054140543 – look for Grace, then visit us personally for enrollment.
    We have schedules weekly and always starts every Monday so we can accommodate you anytime.

    By: heatsschoolofweldingtechnology on March 13, 2010
    at 11:05 pm

  89. hi! do you have welding inspectors course on march to april 2010? duration?
    please do reply soonest so i can make decisions asap.

    tnx

    By: jojo mill on March 17, 2010
    at 5:26 am

  90. Hi Jojo, sorry to inform you that we do not have schedule for Welding Inspector’s Course in March and April 2010. Our enxt schedule will be June/July. Thanks

    By: heatsschoolofweldingtechnology on March 17, 2010
    at 10:07 am

  91. i need ur responce sir,plsss

    By: lets on March 18, 2010
    at 11:45 pm

  92. ask ko lng po if meron kau school d2 sa mand.city or khit near in metro mnla msyado po malayo ung tarlac para sa akin.pls!txt me the detail

    By: orly guinto on March 21, 2010
    at 10:18 pm

  93. Hi Orly, sori, wala pa po kaming branch sa Manila. regards

    By: heatsschoolofweldingtechnology on March 23, 2010
    at 6:31 pm

  94. Good day!
    Hi, i am interested in your W.I. course. Can you send me your course outline for W.I. thru my email.

    Thank you and more power!!

    By: gibo on March 24, 2010
    at 5:12 pm

  95. email sent. regards

    By: heatsschoolofweldingtechnology on March 24, 2010
    at 6:57 pm

  96. hello, good day po. interested po ako mag enroll for SMAW I, i have only backyard experience in welding. I just want to ask if i can easily get an OJT in big industrial companies, could ur school will be able to assist me regarding to that matter? thanks…

    By: nilo on April 11, 2010
    at 2:18 pm

  97. Thanks for the detailed courses info. I am interested on the Welding Inspector Course.
    May I know then whether you have branch office in Cebu City ?

    By: ROGER on April 22, 2010
    at 10:58 am

  98. Hi Roger, sorry to inform you that we do not have any branch yet aside from Tarlac Campus. Regards.

    By: heatsschoolofweldingtechnology on April 22, 2010
    at 12:17 pm

  99. good morning, wala b kyo HEAT school dity sa Tuguegarao City. Kindly feedback. magenroll po sana kami na magkakapatid ng SMAW NCI/NCII. tHANKS

    By: VICE REGALA on April 23, 2010
    at 8:03 am

  100. Hi Vice, ala po kaming branch sa Tuguegarao. Enrol na lang po kayo sa Tarlac, anyway, free naman po ang boarding house kaya walang problema. regards

    By: heatsschoolofweldingtechnology on April 23, 2010
    at 9:27 am

  101. hi heats. nalaman po namin na color blind ang anak ko.. .naka 3rd year mechnical eng. siya … at nag tapos ng aircraft tecnician… 24 years old na siya,, sabi niya wala naman diperensya ang tingin niya ng kulay meaning he can idntiin a our normal world… pero pag nag tetest siya sa color blind test .. color blind sya…
    am worried baka di siya matanggap sa airline industry… sa welder .. ok ba kahit color blind…

    By: elisa apelado on May 25, 2010
    at 10:10 pm

  102. ano po ang pina ka importante na ma i pass sa medical exam.. i hpoe po that through you school my sone could still have a bright future…thanks po!

    By: elisa on May 25, 2010
    at 10:15 pm

  103. anak ko po kasi ay na diagnosed na color blind…tapos po siya ng aircraft technician…at 3rd year mechanical eng…pwede po ba siyang maging welder kahit color blind ciya…

    By: elisa on May 25, 2010
    at 10:47 pm

  104. pwede po sya as welder kahit color blind sya

    By: heatsschoolofweldingtechnology on May 27, 2010
    at 8:13 pm

  105. General medical lang po kailangan nami. kasi iniwasan namin yung mga may hika. di kasi pwede ang welding sa mga may hika

    By: heatsschoolofweldingtechnology on May 27, 2010
    at 8:15 pm

  106. thank you heats.. .sa information .. nabunutan ako ng tinik..isang araw pupunta dyan anak ko.Mabuhay kayo!!!

    By: elisa on May 31, 2010
    at 2:35 pm

  107. You are welcome po. We exists for this purpose

    By: heatsschoolofweldingtechnology on May 31, 2010
    at 4:44 pm

  108. sir good day ask ko lang po yung painting inspector course nyo ay kasama ng exam for certification and magkano nga fee sa lahat plano ko mag enroll pag uwi ko

    By: pancho villa on June 11, 2010
    at 1:57 am

  109. Local course lang po ito to train engineers in becoming a painting inspectors. But there will be end-of-course assessment. Kung maipasa mo ang end of course assessment, we are sure kaya mo ring ipasa ang exams sa mga international licenses.
    Course Fee – P10,000 – 5 days

    By: heatsschoolofweldingtechnology on June 11, 2010
    at 3:48 am

  110. Hi helloo po mam try ko sana mag tranning sa school u , Ihave a lot of trainning pero basic lng parati gusto ko maging certified,, next week po ang uwi ko, , tnx

    By: Rogelio Abuan Jr. on June 17, 2010
    at 11:44 pm

  111. hi,nabasa q kc n kailangang 3rd year engineering pra mkapag-train as welding inspector.interesado sna aq kumuha nang training non sa inyo kya lng highschool grad lng aq,pero my certificate n q ng smaw,gmaw at fcaw.may rt din aq at ut,and my experience n din nman aq!pwede kaya aq mkakuha ng training jan sa inyo?

    By: topher on June 18, 2010
    at 4:18 am

  112. we can make you a certified welder here. enroll na lang po kayo dito pagdating nyo from monday to saturday. regards

    By: heatsschoolofweldingtechnology on June 18, 2010
    at 7:25 am

  113. with your qualification, qualified ka to join our welding inspector course. sa dec. 6-10 po and next training namin.

    By: heatsschoolofweldingtechnology on June 18, 2010
    at 7:26 am

  114. hi im kris..i would like to inquire if you also offer any all in 1 package courses that include SMAW NC I, SMAW NC II and GTAW II..if none, is there any possible that soon you will have this all in one package courses? and is there any disadvantages for the students if they take this 3 courses at a time?

    By: kris on June 20, 2010
    at 8:37 pm

  115. naka-offer na po yung 3 in 1 course (SMAW NCI, SMAW NCII at GTAW NCII) 102 training Days

    By: heatsschoolofweldingtechnology on June 21, 2010
    at 8:18 am

  116. Im ramil, ask ko lang kung may pag asa pa ako na mkapag work abroad im already 32 years old at graduate ako ng college, BSIT. Gusto ko mag enrol sa inyo kya lang bka wala na tumanggap saken dhil 32 na ko.

    1.kpag natapos ko ba ang ang smaw at gtaw nc 2 ay kelangan ko pa mag train ng smaw/gtaw combination, hindi pa ba enough ang smaw at gtaw nc2 para mkapag work ako abroad?

    2. malabo ang mata ko kapag sa malayo, pero kapag malapit ay malinaw, in short near sighted ako. Makaka apekto ba to sa sa pagwewelding ko, tatanggapin ba ako sa abroad khit near sighted ako?

    3. Kelan ako pwedeng kumuha ng WPQT?

    4. Ano ang Age limit ng welder sa abroad at ilang taon dapat ang experience para makapag abroad?

    Sana po ay masagot nyo agad ang mga tanong ko. maraming salamat po..

    God bless heats..

    By: Ramil Callada on June 24, 2010
    at 6:19 pm

  117. sir mag inquire lang ako yung sa welding inspector na course nyo 40 hrs lang yun? bale 2nd year college lang ako pero i have an experience na sa abroad in dubai in particular qc inspector po ako dun for 3 years na.. bale i want to enroll sana para ready na ako for cswip 3.1 pls advice po kung pwde po ako kumuha kahit 2nd year level lang ako

    By: lester on June 30, 2010
    at 12:22 am

  118. pwede po kayo mag enroll. May AWS-CWI din po kami this sept and dec 2010

    By: heatsschoolofweldingtechnology on June 30, 2010
    at 8:03 pm

  119. sir this coming september 2010 may offer ba kau sa WI and NDT course? tnx and more power..if there’s any i’ll registered for enrollment..

    By: EMERSON P. on July 18, 2010
    at 1:39 pm

  120. May AWS-CWI po kami sa september. You can register now.

    By: heatsschoolofweldingtechnology on July 18, 2010
    at 10:33 pm

  121. gud am sir, i would like to ask, if sino po yung instructor ng UT na ASNT Level III, coz gusto ko magtraining jan ng NDT course.

    By: jonas on August 16, 2010
    at 10:47 am

  122. Hi Jonas, we already sent email to you but it bounced back. I guess your email address is wrong. regards

    By: heatsschoolofweldingtechnology on August 16, 2010
    at 2:16 pm

  123. this is my email add. (edited) pls resend also your reply po.tnx

    By: jonas on August 17, 2010
    at 5:44 pm

  124. sir,i have been in touch with you company asking for a trainee opportunity as an orphant,but there was no aswer till now,but sir i am still using office as avenue for me to fulfil the dream of my welding career in your company,and i somuch believe that you are the God sent person for me.therefore,with this comfidence i am especting a possitive reply this time;you can call me with this number;+233547752148 Thanks and God bless you.

    By: williams ubong on August 18, 2010
    at 11:31 pm

  125. hi william, sorry to say that our scholarship program is for filipinos only. thanks

    By: heatsschoolofweldingtechnology on August 19, 2010
    at 6:56 am

  126. good day po, 3rd yr undergrad ako ng computer engineering, currently ndt tech rt, mt, pt level II ako d2 sa ksa w/ 5yrs exp in oil & gas, refinery, power plant & constructions, pwede po ba ako kumuha ng aws-cwi sa inyo? ilang araw seminar at exam? paki email na lang po complete details…thanks

    By: eja on September 6, 2010
    at 2:37 am

  127. yes qualified na qualified ka to take the AWS-CWI. Please register the earliest. thanks

    By: heatsschoolofweldingtechnology on September 6, 2010
    at 4:46 pm

  128. yung $2200 para sa aws-cwi kasama na ba boarding house dun? at saka di ba alanganin ung exam date ng dec 24, bisperas ng pasko nasa byahe ako pabalik ng las pinas, di kaya sa daan na ko magpasko?

    By: eja on September 6, 2010
    at 6:07 pm

  129. actually di po kasama boarding house dun, pero pwede po kayo mag stay sa boarding house ng school (first come first served basis) regards

    By: heatsschoolofweldingtechnology on September 9, 2010
    at 4:34 pm

  130. Hi! where po pwede mg enrol… this october? and anu date start class? anu requirments? how much tuition? pls…. help me.. thanks

    By: jessica on September 23, 2010
    at 12:04 pm

  131. hi jessica, pwede po kayo mag enrol kahit babae, free po ang boarding house. ang tuition po ay eto:
    SMAW NCI – P12,000 – 34 DAYS
    SMAW NCII – P22,000 – 34 DAYS
    GTAW NCII – P30,000 – 34 DAYS
    basic Welding Course – P5,000 – 6 days

    Call us at 09054140543 – look for Grace for more info.

    By: heatsschoolofweldingtechnology on September 23, 2010
    at 4:48 pm

  132. hello. i’m a ofw but here in pinas right. i’ve no basic know how about welding. in your website i read that i take basic or nc 1 and so on, i mean SMAW 1, 2 then GTAW. in the short course what i would take same as the three i mention and can i have discount also if i pay cash. i might work soon abroad thats why thinking a short course but the full course is better. pls. reply. thanks

    By: lito jimenez on September 30, 2010
    at 10:47 pm

  133. hi again. do you provide the clothing i mean the leather apron and gloves and shoes also. or we have to provide or buy all to do actual training. by the way my province is tarlac in camiling. thanks

    By: lito jimenez on September 30, 2010
    at 11:22 pm

  134. mas maganda talaga po yung long course, pero kung ala po talaga time, pwede na rin yung short courses
    Basic Welding – 6 days – P5,000
    Pipe Welding – 6 days – P8,000
    TIG Welding – 6 days – P15,000

    Pero WQT at Heats ertificate lang po ang mabibigay sa inyo.
    thanks

    By: heatsschoolofweldingtechnology on October 1, 2010
    at 6:28 pm

  135. free lang po ang gloves at apron.

    By: heatsschoolofweldingtechnology on October 1, 2010
    at 6:29 pm

  136. hi! do you have welding inspectors course on nov 2010? duration?
    please do reply soonest so i can make decisions asap.

    tnx

    By: WAEL on October 19, 2010
    at 11:51 am

  137. Hi good day po. I am applying as an industrial painter in NZ. Meron po ba kayo course or training para sa industrial painting or painting related course. Is it posible to just sit in and have the exams since my employer requires that I should be there by end of November
    Thank you so much.

    By: Marc on October 19, 2010
    at 10:58 pm

  138. Our AWS-CWI will be on December 18-24 at USD2,200

    Our Local Welding Inspector will be on Dec 13-17, 2010 at P10,000

    regards

    By: heatsschoolofweldingtechnology on October 20, 2010
    at 4:29 pm

  139. Hi, next year pa po ang plan namin for Industrial Painting. Di ka namin matutulungan for this. Available lang kasi ung instructor namin ng December. Kung pwede ka ng December we can personally teach you the practical and some theory with Painter Certificate issued by a NACE 2 Coating Inspector

    By: heatsschoolofweldingtechnology on October 20, 2010
    at 4:32 pm

  140. Hi sir! I would like to express my interest in taking up the first enrollment package. may I ask for any brochure or details of classroom instruction and hands on training of said courses sent thru my email add sir. How long (in months) would be the duration of said courses in a continous basis if I will enroll for said courses with the first package sir.

    Thank you very much!

    Rudy

    By: Rudy on October 28, 2010
    at 12:27 pm

  141. Hi Rudy,
    Yun pong course description ay nandito na sa website. please check our course description.

    Duration:
    SMAW NC I – 34 days
    SMAW NCII – 34 days
    GTA NC II – 34 days

    By: heatsschoolofweldingtechnology on October 28, 2010
    at 1:04 pm

  142. Hi …. tanong ko lang po if meron po certificate na ma recieve after sa welding inspection course?

    thanks

    By: byron on November 2, 2010
    at 1:11 am

  143. Meron po, Certificate of Completion kung maipasa mo end of course assessment. Certificate of attendance kung di mo maipasa end of course assessment. Pero di po ito lisensya tulad ng AWS-CWI.

    By: heatsschoolofweldingtechnology on November 2, 2010
    at 9:12 am

  144. Greetings! I’m from Baguio City and I’m looking for a Welding Inspector school, thank God I found this site, I’m a Certified SMAW NC II, GMAW NCII, FCAW NCII, and GTAW NCII from RTC-CAR, I haven’t worked yet but I’m planning soon when I finish a Welding Inspector course. Can you please send me an email or reply from this page containing the complete requirements for the enrollment? It is with much gratitude.
    Thank you and God Bless.

    By: william on December 15, 2010
    at 7:47 pm

  145. Dear Mr. Costales, our next welding inspector course will be on Jan. 3-7, 2011, June 2011 and December 2011. The course fee is P10,000 inclusive of lunch and snacks. You can also stay in our boarding house if there is available bedspace for you in those days because our boarding is actually for our welder trainees only. regards. contact us at 09054140543 – look for Grace

    By: heatsschoolofweldingtechnology on December 16, 2010
    at 3:24 am

  146. hi..tanong ko lang po kung meron bang culinary course offered here in batangas?merry christmas po..

    By: lolita lopez on December 19, 2010
    at 5:24 pm

  147. Good day! I am pleased to read your reply, but can I ask if I am qualified for the course? If so, what will be the requirements for me to bring for the said dates of enrollment? Thank you for your time.

    By: william on December 20, 2010
    at 12:51 pm

  148. Yes you are qualified to take the course… bring with you your cv and certificates. regards

    By: heatsschoolofweldingtechnology on December 20, 2010
    at 5:26 pm

  149. Good day. My wife and I are planning to take a NDT short course (UT, MT, PT) on June this year. How much will it cost for both of us and can you send me your course outline for this course.
    And one more thing, if we will take the W.I. course, will it cover the NDT basics also?

    Thank you and all the best.

    By: Dominic Sandiego on January 16, 2011
    at 2:57 pm

  150. Please call us up at 09054140543 – look for Grace for registration. If we muster minimum trainees for June, we will conduct the course, otherwise we will cancel.
    Yes, in the WI Course, there is a subject for NDT for a day.

    By: heatsschoolofweldingtechnology on January 16, 2011
    at 5:44 pm

  151. sir,

    how much is the fee for painting inspector course including boarding house?

    thanks..

    By: chad on January 21, 2011
    at 7:55 pm

  152. The Painting Inspector course fee is P10,000 inclusive of snacks, lunch and module. You can stay in our boarding house with our current trainees if you are not choosy. regards

    By: heatsschoolofweldingtechnology on January 21, 2011
    at 11:06 pm

  153. hello.ano specific date po sa June ang start ng training ng welding inspectors course nyo?

    By: Dominic Sandiego on January 23, 2011
    at 3:00 pm

  154. KINDLY SEND ME THE FORM TO BE REGISTERED ON YOU NEXT EARLIST SCHEDULE OF WI COURSE.
    THANX

    By: Dominic Sandiego on January 23, 2011
    at 3:15 pm

  155. June 13-17, 2011 po. thanks

    By: heatsschoolofweldingtechnology on January 23, 2011
    at 5:13 pm

  156. thanx for sa reply.makakasama ko po sana sa training ang wife ko at galng pa kami ng Samar.may boarding house po ba kayo na pwedi ko makasama ang wife ko.

    By: dominic sandiego on January 23, 2011
    at 6:45 pm

  157. actually yung boarding house is for guys lang kasi sama sama mga trainees. Kung mag te training din ang wife mo, then i a arrange na lang namin, wla pong problema dun. regards

    By: heatsschoolofweldingtechnology on January 23, 2011
    at 10:25 pm

  158. di po ba natuloy yung training sa scaffolding course nyo

    By: christopher castro on February 15, 2011
    at 4:47 pm

  159. hindi pa po… wait for further notice pa po…

    By: heatsschoolofweldingtechnology on February 15, 2011
    at 5:48 pm

  160. inquire ko rin po yung painting inspector course nyo kung ano requirements at course fee

    By: christopher castro on February 17, 2011
    at 6:54 am

  161. P10,000 po ang tuition fee. Ang requirements at least 3rd year college po. Pero kung may experience na kayo kahit High school graduate lang .thanks

    By: heatsschoolofweldingtechnology on February 17, 2011
    at 7:25 am

  162. tanong ko lang po,kasi po natapos ko na po yung SMAW NCI at NCII sa TESDA.pwede po bang GTAW NCII nalang ang i eenroll ko sa inyo?tnx po..

    By: Marvin M. Menor on February 17, 2011
    at 2:51 pm

  163. yes pwede po, enroll na kayo agad ng GTAW NCII sa amin basta may SMAW NCII kayo kahit saang training center

    By: heatsschoolofweldingtechnology on February 17, 2011
    at 9:37 pm

  164. hi i would like to ask if meron po ba tau schedule for AWS exam on April 2011? Magkano po?
    Thanks

    By: byron on March 8, 2011
    at 1:51 am

  165. i mean AWS CWI exam po.. thanks

    By: byron on March 8, 2011
    at 1:53 am

  166. ask ko lng po kung mg take ng BWC or PWC na course ung 6000 for BWC at ung 9000 for PWC ilang month po siya ? hanggang sa matpos po ba ang course .. and after po ba kayo po ba mag bibigay ng work .. thanks po.

    By: mark anthony a. marave on March 9, 2011
    at 2:07 pm

  167. BWC – 6 days
    PWC – 6 days

    We recommend our graduates po pero di po kami ang nagbibigay ng work. thanks

    By: heatsschoolofweldingtechnology on March 9, 2011
    at 3:53 pm

  168. wala po kami ng april. thanks. USD2,200 po

    By: heatsschoolofweldingtechnology on March 9, 2011
    at 4:11 pm

  169. Dear sir/madam,i am ubong williams from nigeria in west africa.i am an orphant and i attended tecgnical school,and i did welding engineering,but the death of my father stop me from achieving my weldding career.therefore, i hereby ask for help from your company to help me achieve my weldding career aim in life.sir, i will be grateful if you grant me this opportuity in life.so hope to hear from you soon.Thanks.

    By: ubong williams on March 14, 2011
    at 3:38 am

  170. me branch na po ba kau sa manila?

    By: roger borja on March 15, 2011
    at 10:35 pm

  171. wala po, sa tarlac lang kami

    By: heatsschoolofweldingtechnology on March 16, 2011
    at 7:59 am

  172. HELLO.I WANT TO TRAIN PIPELINE WELDER.I LEAVE IN QATAR,DO U HAVE OFFICE IN QATAR.PLS,I REALY WANT TO DO THE TRAINING.OR MOST I COME OVER THERE TO DO THE TRAINING?

    By: ONYEKA on April 25, 2011
    at 7:59 pm

  173. We have center in Tarlac city Philippines only. regards

    By: heatsschoolofweldingtechnology on April 26, 2011
    at 8:22 am

  174. sir/madam
    do you have any branch in taguig city? but as of now i work here in saudi arabia as welder..but i want to extend my career as welding inspector..i want to know how much the cost and requirements for this training…and also do you accept staying students?

    By: henry bausa on May 20, 2011
    at 8:10 pm

  175. we have WI course on June 6-10, 2011. Tuition fee is P10,000

    By: heatsschoolofweldingtechnology on May 22, 2011
    at 10:55 am

  176. im 33 years old graduate of BS computer engineering, can i still have a career in welding?

    thanks…

    By: melchor catolico on May 29, 2011
    at 2:28 pm

  177. hi!…ask ko lan po kung pwede sa inyo mag enrol ang high school under grad?

    By: sam on July 4, 2011
    at 10:00 am

  178. pwede po

    By: heatsschoolofweldingtechnology on July 11, 2011
    at 8:56 am

  179. Sir,

    I’m currently working in Hyundai (Karan Gas Facilities) as Piping CAD Operator, I want to ask that how much the training cost for NDT? and I heard that NDT Inspector are indemand in abroad?

    By: Daniel Intes on July 21, 2011
    at 1:26 pm

  180. HELLO PO,GUSTO KO PO SANA I INROLL AKING PAMANGKIN.HIGH SCHOOL GRADUTE LANG PO SYA.GUSTO PO PUMUNTA AT MAKAPAGTRABAHO SA IBANG BANSA.KONG SHORT COURSE LANG PO BA KUKUNIN!PUEDE NABA PO SYA MAKAPAGTRABAHO SA IBANG BANSA? PERO NASA PARANAQUE PO KAMI.METRO MANILA.MAYRON PO BA KAYONG BRANCH DITO SA.PARANAQUE.OR LAS PINAS.HINDI NAMIN MA AFFORD YONG GASTOS SA PAGKAIN ARAW ARAW.KONG DYAN SA TARLAC.MAG-ARAL.AT ANO PONG MGA RECQUIRTMENTS NYO.KONG SAINYO PO BA MAG-ARAL SIGURADO NA PO BA NA MAKAPAG ABROAD?
    KAILAN PO ANG INYONG INROLMENT. MAYRON POBA KAYO SA AUGUST,SEP,OCT,2011
    PASENSYA NA PO SA MGA TANONG KO.SALAMAT PO! PAKI RESPONCE NYO NAMAN PO AKO. SALAMAT

    By: ALMA on August 12, 2011
    at 2:11 pm

  181. MAYRON PO BA KAYONG SHORT PACKAGE COURSE. WELDING MAGKANO POBA? ANO ANO PO BA ANG INYONG MGA COURSE. MAYRON PO BA KAYONG AUTOMOTIVE MECHANIC COURSE. SALAMAT PO.

    By: ALMA on August 12, 2011
    at 2:20 pm

  182. Since bago po sya, suggestion po namin na ang mga sumusunod na kurso ang kunin nya;

    Basic Welding – P6,000
    SMAW NCII – 34 DAYS – P21,000
    GTAW NCII – 34 DAYS – P34,000

    Mas malaki po tsansa nya makapag abroad gaya ng mga graduates namin.

    Sa Tarlac lang po kami. May boarding house po sa harap namin P1,500 kada buwan. Ang kurso po namin ay nagsisimula tuwing Lunes regular po yun.

    By: heatsschoolofweldingtechnology on August 12, 2011
    at 5:52 pm

  183. yung registration po ba 1000 deductible po a tutuion fee? and ang kukunin ko po kasi SMAW NC I and SMAW NC II may discount pa ba and puwede installment.

    may vacant pa po ba para sa august 22 2011. paanu po ba ang pasok niyan 7 days a week? 8 hours a day?

    By: melchor catolico on August 12, 2011
    at 9:01 pm

  184. yung registration po ba 1000 deductible po ba sa tutuion fee? and ang kukunin ko po kasi SMAW NC I and SMAW NC II may discount pa ba and puwede installment.

    may vacant pa po ba para sa august 22 2011. paanu po ba ang pasok niyan 7 days a week? 8 hours a day?

    By: Melchor Catolico on August 12, 2011
    at 9:06 pm

  185. Hi melchor,
    Yes, yung 1000 ay deductible sa tuition fee. Pag installment po, ay 5% ang discount. Yes may vacant pa po sa August 22, 2011.

    Ang suggestion ko po para makatipid kayo ay ganito;
    Take Basic Welding – P6,000 – 6 days
    Take SMAW NCII – P21,000 – 34 days

    Total P27,000 less 5% discount
    Net total of P25,650

    After SMAW NCII, pwede ka na mag take ng GTAW NCII dagdagan mo na lang yung na discount mo na mahigit 7T.

    By: heatsschoolofweldingtechnology on August 12, 2011
    at 9:57 pm

  186. Para di po kayo ma confuse, take SMAW NCI, SMAW NCII then GTAW NCII. Regards

    By: heatsschoolofweldingtechnology on August 13, 2011
    at 12:52 pm

  187. already talk with grace. ill go with your first recommendation. ill call again grace this monday.. medyo malabo lang yung computation ng 5 percent discount. thanks and god bless.

    By: Melchor Catolico on August 13, 2011
    at 7:25 pm

  188. Good Day,
    I need info on welding training (between 4-5 months) for a large number of delegate.I have sent you a mail on this,I hope to get a response ASAP.

    Thank you

    By: OS on August 24, 2011
    at 9:03 pm

  189. sir kailan po ba ang date ng ndt para po mapaghandaan ko kase magfile me ng leave sa company co thanks best regards I am a graduate of BS Marine Transportation

    By: george u claton on August 29, 2011
    at 2:55 am

  190. hello po
    ask ko lang po nagtuturo din po ba kayo ng MIG welding ?
    anu po ang requirement para maka pag take ng MIG welding
    kailangan pa po b ng SMAW NCII at GTAW NCII bago mag MIG ?

    By: joel manalaysay on September 5, 2011
    at 8:27 pm

  191. Good Day,
    ma’am & sir ngayon po nandito ako sa saudi draftsman po ako graduate po ako ng asso. course as I.T. plano ko pong mg iba ng line demmand po kse d2 ang inspector isa na d2 ang painting inspector, ano po bang requiremnts? meron din po bang license examination?
    thks godbless

    Jay Pilapil

    By: Jay Pilapil on September 6, 2011
    at 3:23 am

  192. You are qualified to join the Painting Inspector Course. Regards

    By: heatsschoolofweldingtechnology on September 6, 2011
    at 10:47 am

  193. so far wala po kaming MIG. regards

    By: heatsschoolofweldingtechnology on September 6, 2011
    at 10:48 am

  194. sir, ask ko lang if kelan kayo mag offer ng course for sandblasting and painting

    By: ronald on September 8, 2011
    at 4:43 pm

  195. medyo naudlot po yung plan namin, kasi kokonti ang inquiries hehe, pero nasa plan pa rin po namin, pero di namin alam ngayon kung kelan makakapagsimula. thanks

    By: heatsschoolofweldingtechnology on September 8, 2011
    at 8:03 pm

  196. Hi,
    The enrollment of our Welding Inspector Course for Sept 26-30, 2011 schedule is now on going. If interested please enroll early for your seat. thanks

    Note: Welding Inspector Course is now offered monthly. thanks

    By: heatsschoolofweldingtechnology on September 18, 2011
    at 11:59 am

  197. Sir nag aarange din b kayo ng welding inspector qualification exam after ng course taken from your school hope for your response thanks!

    By: Grover on September 25, 2011
    at 6:57 am

  198. local training lng po ang WI namin, kung gusto nyo po ng further studies, ang next po ay CSWIP 3.1 which is international certification recognized around the wolrd. The heats course will give you an edge kapag nag take ng ka ng CSWIP 3.1 in the future

    By: heatsschoolofweldingtechnology on September 25, 2011
    at 7:06 pm

  199. sir, gud am po ask q lng kung meron kyo fcaw

    By: jong abaya on October 12, 2011
    at 11:37 am

  200. so far wala po. thanks

    By: heatsschoolofweldingtechnology on October 12, 2011
    at 3:59 pm

  201. balak ko po kunin basic welder coourse smaw tapos isunod ko basic pipe welding,pagkuha kopo ng dalawang training na to qualified ho ba ako for trade test para makakuhang NC11 certificate?kindly advice po

    By: christopher on November 20, 2011
    at 4:38 am

  202. I suggest kuha ka ng Basic Welding then SMAW NCII para may TESDA Certificate ka pagpasa mo.

    By: heatsschoolofweldingtechnology on November 21, 2011
    at 8:27 am

  203. I suggest kuha ka ng Basic Welding then SMAW NCII para may TESDA Certificate ka pagkapasa mo

    By: heatsschoolofweldingtechnology on November 21, 2011
    at 8:29 am

  204. hi!mam and sir; Ung po bang 48hrs para sa gtaw ay actual po lahat un,pipe and plate po ba un,may smaw ncll at gmaw na po ako,my discount po ba.thanks…

    By: jessie on November 24, 2011
    at 1:05 am

  205. actual po lahat yung 48 hrs sa 2 inch pipe po lahat yun, walang plate. 2 inch pipe, 2G, 5G and 6G position. Kung isa lang po i enroll nyo, ala pong discount. regards

    By: heatsschoolofweldingtechnology on November 24, 2011
    at 1:30 pm

  206. hi pls give me sked for basic welding. pde din ba magpa assess after that course? wqt certified din ba?

    By: marvin on November 27, 2011
    at 8:56 am

  207. pwede ka pong mag enroll anytime at mag start upon enrollment. May WQT ka po ng 2G & 3G kung papasa ka sa end of course assessment ng Heats

    By: heatsschoolofweldingtechnology on November 27, 2011
    at 1:52 pm

  208. good morning, im michael from caloocan i got no background about welding.. just wanna ask a suggestion what course should i take??

    By: michael on December 4, 2011
    at 9:46 am

  209. i suggest, kuha po kayo ng Basic Welding, then SMAW NCII then GTAW NCII. Thanks

    By: heatsschoolofweldingtechnology on December 4, 2011
    at 8:43 pm

  210. where can i locate the nearest center?

    By: michael on December 5, 2011
    at 9:24 am

  211. Hi, we are only located in Tarlac City.

    By: heatsschoolofweldingtechnology on December 6, 2011
    at 9:46 am

  212. hello po. ask lang po if you have a training course in stick welding?

    By: ace on December 8, 2011
    at 1:41 pm

  213. meron din po ba kayong copper and stainless steel welding?kasama na po ang training nyan sa GTAW?

    By: ace on December 8, 2011
    at 1:57 pm

  214. Meron po. SMAW NC1, SMAW NCII or Basic Welding and Pipe Welding Course

    By: heatsschoolofweldingtechnology on December 8, 2011
    at 8:00 pm

  215. May TIG CArbon steel at TIG Stainless steel at GTAW NCII

    By: heatsschoolofweldingtechnology on December 8, 2011
    at 8:01 pm

  216. hi i want to know if you have training for welding inspector and painting inspector this coming january – february 2012

    Thanks

    Benjie

    By: benjie on December 21, 2011
    at 3:51 pm

  217. yes we have for January and February

    By: heatsschoolofweldingtechnology on December 22, 2011
    at 4:56 pm

  218. gdday sir/madam,i jst wnt to knw f im qualified to take a welding inspector course coz im only a high school grad.but currently in malaysia working in electrical@engineering company as a chief welder and hv an experience in welding for almost 20 yrs nw but i do not hv any certificate jn welding,so is my experience enough to take d welding inspector course?i will be coming home this mid 2012 so kindly reply to my email or here thnk u vry much.

    By: haris on January 3, 2012
    at 12:59 pm

  219. Sir,
    I wish to take a course on welding inspection and NDT.
    Can you please send me the registration form for the next schedule.
    Thanks,
    Ibrahim in Cameroon

    By: Chin Ibrahim Fon on January 17, 2012
    at 6:13 pm

  220. Good Day,

    I would like to request for a welding inspector course registration form for Feb.6-10 2012 schedule.
    Thank you,

    sledge

    By: sledge hammer on January 22, 2012
    at 4:17 pm

  221. pag nag enroll po b jan ng 268 hours, seperate po b ang bayad para sa testing ng WQT certificate at makukuha din po b jan ang AWS certficate?

    By: Julius Rommel Andaya on January 25, 2012
    at 4:02 pm

  222. kasali na po ang WQT sa bayarin pero di po sya AWS Certificate. Third Party Certificate sya but from Philippines din

    By: heatsschoolofweldingtechnology on January 26, 2012
    at 8:32 am

  223. good eve po saan po ba ang school nyo sa tarlac

    By: emil on February 6, 2012
    at 10:54 pm

  224. sa Romulo Highway, #4 Joaan Subd., Carangian Tarlac City infront of St Matthew Academy

    By: heatsschoolofweldingtechnology on February 7, 2012
    at 8:36 am

  225. sir ask lang po ako kung meron kau nearest branch sa Q.C?
    ahm pwidi po ba xa fon nalang keu mag reply?

    By: rex on February 10, 2012
    at 8:40 am

  226. hi, good morning!

    I am teacher but i want to take short courses that fit my profession.
    i hardly find in your website what course really for my interest. Hope to give me time suggesting what should i do.
    By the way sir, i love hands on works

    Thanks and God bless

    By: al on February 12, 2012
    at 6:39 am

  227. welding courses lang po meron kami at the moment. regards

    By: heatsschoolofweldingtechnology on February 12, 2012
    at 7:51 pm

  228. are u offering WQT test? nag aaply kc yung bf ko , tapos hinahanapan nila ng wqt certificate. kaso wla pa cya nun

    By: yssa on March 5, 2012
    at 5:25 pm

  229. Yes we conduct WQT.

    By: heatsschoolofweldingtechnology on March 6, 2012
    at 7:13 pm

  230. san po address nio?

    By: yssa on March 6, 2012
    at 7:26 pm

  231. Romulo Highway, #4 Joanne subd., Carangian, Tarlac City

    By: heatsschoolofweldingtechnology on March 6, 2012
    at 9:18 pm

  232. magkano ba babayadan? and ano mga kailangan?

    By: yssa on March 6, 2012
    at 11:04 pm

  233. Basic Welding – 6 days – P6,000
    SMAW NCII – 34 days – P21,000
    GTAW NCII – 34 days – P34,000
    regards

    By: heatsschoolofweldingtechnology on March 8, 2012
    at 8:11 am

  234. Magandang Araw Po,
    Balak kong PaPag-aralin ang Anak kong Lalaki na tapos na nang Smaw-1 at nakapag OJT na, nang tatlong short courses (Pipe welding smaw, Tig welding carbon steel, tig welding stainless steel), Matanong ko lang Po, Mayron bang Theory o lecture na magaganap sa bawat korso bago ang actual at sa bawat korso, mayron bang examination sa huling araw. Halimbawa Po, Hindi ka papasa sa examination pagkatapos nang anim na araw sa bawat korso, mabigyan ka ba nang Certificate at kong hindi o walang Certificate na magaganap, anong gagawin nang isang studyanti halimbawa wala na siyang pera para ituloy ang training. Is it guaranted that after 6 days, the student knows well how to weld a carboon steel ? & others.

    By: Alfredo Bajao on March 11, 2012
    at 10:45 am

  235. kung puro po short courses kukunin nya pwede po. pero start din po sya as follows:

    1st step – take Pipe welding – 6 days
    2nd step – take tig welding – 6 days
    3rd step – take SS Tig welding – 5 days

    Pure practical po ang short courses namin walang theory
    May end of course assessment po

    Kung di po sya makapasa, pwede po sya mag 2nd try sa end of course assessment. Kung di pa rin po makapasa, magdagdag po sya ng days up to 10 days so mag add sya ng 4 more days (at different cost). Pero normally po pumapasa na kaya depende po kung fast learner o slow learner. Kung fast learner po, makakapasa na po sya. Wala nga lang pong TESDA certificate mga short courses namin. pero magkakaroon po sya ng Certificate of completion at additional na WQT kung makakapasa sya.

    By: heatsschoolofweldingtechnology on March 13, 2012
    at 2:16 pm

  236. Sir,

    Goody po, tanong lang ako kung kaylan ang schedule ninyo ng Coating Inspector.

    Best Regards
    nelson

    By: Nelson Carian on March 21, 2012
    at 7:42 am

  237. Monhtly po ang schedule namin. pls check our schedule and enroll. Kung di po ma meet ang minimum participants namin, kina cancel po namin. thanks

    By: heatsschoolofweldingtechnology on March 21, 2012
    at 8:32 am

  238. Gud pm! Ask ko lang kung meron kayo SMAW/GTAW combination for 2 weeks ( short course ) thank’s

    By: Yanyan on March 24, 2012
    at 12:02 pm

  239. Ok monthly pala! Pero diba meron kayong mga short courses ( 48hours 1 week ) SMAW. Pede paki reply yung quotation dito? Thank’s

    By: Yanyan on March 24, 2012
    at 12:11 pm

  240. Mam grace paki reply naman po yung email ko sa inyo. Thank’s

    By: Yanyan on March 24, 2012
    at 2:15 pm

  241. hi im jerry, planing to be able to enroll TIG / MIG / GTAW, I can know if you have branches in Manila? whats the requirements how to enroll in this course

    By: jerry on March 25, 2012
    at 12:21 pm

  242. may napansin po ako sa mga course nyo…yun din po ba naka sulat sa certification matatangap ko pag mag aral ako sa inyo…kac wala nakalagay na weld position ang tinatanong kac pag mag apply ka ano WQT mo 6G ka ba? TIG Welding Stainless Steel ….lahat na po ba plate at pipe 1F to 4F at 1G to 4G at pipe na 2G,5G and 6G lahat po ito mapag aralan ko na at naka sulat sa certification matatanggap ko?

    By: Kim Lim on March 29, 2012
    at 1:33 am

  243. Kung may WQT ka ng 6G, qualified ka na sa lahat except 6GR position. Kung kukuha ka ng SMAW NCII, mabibigyan ka ng 6G sa SMAW, kung kukuha ka ng GTAW NCII, mabibigyan ka ng 6G sa GTAW kung maipapasa mo end of course assessment

    By: heatsschoolofweldingtechnology on March 29, 2012
    at 6:38 am

  244. meron po, you enroll anytime and start anytime.

    By: heatsschoolofweldingtechnology on March 29, 2012
    at 6:49 am

  245. ala kaming monthly ofr that.
    GTAW/SMAW COURSE – 6DAYS – P19,000 – 10 DAYS – P31,666

    By: heatsschoolofweldingtechnology on March 29, 2012
    at 6:52 am

  246. We dont have branch in manila. our requirements are; form 137, medical clearance, phot id,

    By: heatsschoolofweldingtechnology on March 29, 2012
    at 6:54 am

  247. Pwede ba TIG welder lang ang e enroll ko?

    By: Jerry on March 29, 2012
    at 8:30 am

  248. See you on 10th of april. Bukas ba kayo sa 9?

    By: Yanyan on March 31, 2012
    at 6:36 am

  249. sir/ma’am,
    i’m planning to enroll basic welding course then upgrade to TIG and MIG course… magkano po lahat magagastos ko… how many hours/days ang courses… im a graduate of ECE.. waiting for your reply and send also your enrollment schedule for april or possible schedule… thank you and more Power

    By: Eric Magaling on March 31, 2012
    at 4:38 pm

  250. Ala pa po kaming MIG. Soon pa lang. The best way for you is to tkae Basic Welding, then Take SMAW NCII then GTAW NCII

    By: heatsschoolofweldingtechnology on April 3, 2012
    at 2:19 pm

  251. Bukas po

    By: heatsschoolofweldingtechnology on April 3, 2012
    at 2:22 pm

  252. pwede po basta may SMAW NC II ka na or experienced pipe welder

    By: heatsschoolofweldingtechnology on April 3, 2012
    at 2:23 pm

  253. ano po ba ang pre-requisite para makapag-enroll ako ng CSWIP-AWS. Survey Engineer po kasi ako at gusto ko po sanang mag up-grade sa aking trabho. Thanks

    By: Flatt on April 5, 2012
    at 8:17 pm

  254. ala po kaming CSWIP Course. Wala din po kaming AWS Course this year.

    By: heatsschoolofweldingtechnology on April 6, 2012
    at 9:45 am

  255. Local welding inspector course lang po meron kmi

    By: heatsschoolofweldingtechnology on April 14, 2012
    at 8:32 am

  256. Im looking for this course..following:
    ULTRASONIC TESTING, RADIOGRAPHY TESTING,MAGNETIC PARTICLE AND LIQUID PENETRANT TESTING. is it all available?

    By: Jeremy Tiglao on April 30, 2012
    at 11:58 am

  257. pde po bng smaw ncII lng kunin tpos gtaw ncII

    By: joseph on May 11, 2012
    at 4:33 pm

  258. wla n po b kyung sked ng smaw ncII after ng july 2???

    By: joseph on May 11, 2012
    at 10:48 pm

  259. Kuha ka na lang ng Basic Welding -6 days – P6,000 then take ka ng SMAW NCII then GTAW NCII para ma meet mo lang ang requirement to take SMAW NCII

    By: heatsschoolofweldingtechnology on May 12, 2012
    at 8:55 am

  260. Meron po, all year round po ang course namin. i update po namin yan by June or July, first half lang po kasi yang ng taon. thanks

    By: heatsschoolofweldingtechnology on May 12, 2012
    at 8:56 am


Leave a Reply

Fill in your details below or click an icon to log in:

Gravatar
WordPress.com Logo

You are commenting using your WordPress.com account. ( Log Out / Change )

Twitter picture

You are commenting using your Twitter account. ( Log Out / Change )

Facebook photo

You are commenting using your Facebook account. ( Log Out / Change )

Cancel

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 87 other followers